The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V35 V50 NTX 350 Monza Imola All Categories

Sort by Title

Sort by Price

Page 6 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
1 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
4 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Autosol Metal Polish 75ml Tube

SIA30003 Universal Part

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

part in stock 1 in stock

£6.50

INC VAT

£5.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Ball Bearing

SUA90704 Fits Cali 1100, Cal 2, V35 I, V35 II, V35 3, V35C, V50 I, V50 II, V50 3, V50C, V65, V65 SP, V65C

Dimensions:
4.7mm OD

Ball bearing mainly used for small twin steering head races

44 balls required per head race set, we also sell a taper roller conversion FRA19999

part in stock More than 5 in stock

92295704-z 92295704 GU92295704 92 29 57 04
9229 5704 9229.5704 92.29.57.04

£0.20

INC VAT

£0.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Ball Bearing

GEA92220 Fits V50 II, V50 3, V65, V75, V35 II, Nevada 750 (1999-2001), 850T, Daytona (1991-1996), Breva 750, Centauro, MGS-01, V7 Classic, V65 Florida, Lario

Dimensions:
47mm OD

Ball bearing used for gearbox output shaft output end on small block twins

Mainshaft front on V50 II & 3, layshaft rear on V50, V65, V75. Used for rear wheel bearing on 850T (2 bearings required)

part in stock 2 in stock

92201220-z 92201220 GU92201220 92 20 12 20
9220 1220 9220.1220 92.20.12.20

£16.60

INC VAT

£13.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Ball Bearing

TRA92070 Fits 850/1000 ALL Models, Breva 750, Nevada 750, Nevada 350, Cali 1100 (1994-1997), Cali EV, Quota 1100, V35, V50, V65, 850 GT, V7 Classic, V7 Sport, Daytona (1991-1996), Centauro

Dimensions:
110mm OD

Ball bearing for drive box output side

this part will be ordered for you Order now and we will post your order within 7 days.

92201070 GU92201070 92 20 10 70
9220 1070 9220.1070 92.20.10.70

£50.70

INC VAT

£42.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Bolt Kit M10 With Bleed Nipple

BRA01006 Universal Part

Dimensions:
M10 x 1

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

part in stock More than 5 in stock

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Brake Light Switch Fine Thread

ELA14959 Fits 1100 Sport ALL, Centauro, Daytona (1991-1996), V11 Sport, V35 I, V35 II, V35 3, V35 Florida, V35C, V50 I, V50 II, V50C, V50 3, Monza, V65, V65 Florida, V65 GT, Lario, Quota ALL, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, SP II, Spada 3, S3, T3, T4, T5, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Strada 1000, Nevada 750 (1991-2003)

Dimensions:
M10 x 1 x 17mm bolt, 18mm from end to underside of bolt head

Brakelight switch banjo bolt

See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Bar End Black Alloy Pair

HAA32861 Universal Part

Dimensions:
16.5mm OD in handlebars, 20mm x 26mm OD end

Pair of black knurled alloy bar ends, fixes via included bolt

Only for models with standard steel handlebars, not for aluminium handlebars

This part is available by special order, request a quote

£14.40

INC VAT

£12.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Base Gasket

ENA27028 Fits V35C, V65C, V35 TT, V35 II, Imola ALL, V35 3, V50 3, V35 Florida, V75 (4 valves per cylinder), NTX, Breva 750, Nevada 750 ALL, Nevada 350, V50 3, Monza, Monza 2, V65, V65 Florida, Lario, V7 Classic, V7 Racer, V7 Stone, V7 Special, V7 II ALL, 750 Targa, Strada 750

Base gasket

Also known by these part numbers: 27020820, 19020860, 886670. If using instead of 886670 we would recommend an application of gasket sealant

part in stock More than 5 in stock

19020820-z 19020820 GU19020820 19 02 08 20
1902 0820 1902.0820 19.02.08.20

£4.00

INC VAT

£3.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 6 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33