The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   1 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included

 1 in stock

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

 1 in stock

Lightweight M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins). An aluminium filler plug made in Italy.

 1 in stock

 12022600 GU12022600 12 02 26 00
 1202 2600 1202.2600 12.02.26.00

Premium softstyle light grey T-shirt printed with our original Moto Guzzi Cententary design. Celebrating 100 years of Moto Guzzi this design celebrates some of the big names behind the first century of the eagle

Printed on the same premium softstyle shirt as our classic eagle T shirt.

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 1 in stock

Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.

 1 in stock

Footpeg rubber for riders and pillion pegs (depending on model)

 1 in stock

2B002225

Pair of factory engine crash bars finished in black essential for protecting the exposed header pipes and cylinders from expensive damage

You can mount the factory LED spotlight kit ACA02059 to these bars

Fitting kit ACA01999 also required.

 1 in stock

2S002028

Special DB-killer kit with eagle design to rear. The Guzzi eagle compliments the motif on the headlamp and fuel tank and will make your V100 stand out from the crowd.

• dB-Killer compliant with EURO5 regulations=
• Subtle eagle logo
• Supplied with special tool to release anti-tamper screw
• Supplied with fitting screw

 1 in stock

Extra long Fenda Extenda finished in matte black to protect your V100 engine. This is a very practical accessory which will protect your exhaust headers and lower engine. Supplied with all necessary fittings this EXTRA Extenda adds 275mm of protection to your front mudguard

 1 in stock