Lower Gasket for oil sump flange

See ENA14036 for upper sump flange gasket

 More than 5 in stock

01003600-z 01003600 GU01003600 01 00 36 00
 0100 3600 0100.3600 01.00.36.00

Quality sump gasket, used for upper sump gasket on V11 Sport, 1100 Sport and Daytona RS. See ENA01360 for lower sump gasket for V11 Sport, 1100 Sport and Daytona RS. See ENA05630 for lower sump gasket for CARC models up to 2015.

Two required if you have a sump extension fitted. Supercedes Guzzi ref. 01003650

 More than 5 in stock

 14003600 GU14003600 14 00 36 00
 1400 3600 1400.3600 14.00.36.00

Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint

To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005

 Availability varies on this part, check availability

 14003240 GU14003240 14 00 32 40
 1400 3240 1400.3240 14.00.32.40

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

 This part is available by special order, request a quote

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range.

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part also known as a windage plate

 This part is available by special order, request a quote

Dust cover for steering head bearing

2 required on Cali EV and other models

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14517000 GU14517000 14 51 70 00
 1451 7000 1451.7000 14.51.70.00

Washer / shim, protects head bearing

2 required

 This part is available by special order, request a quote

AP8123641

Steering Head Bearing Spacer for base of steering stem

 This part is available by special order, request a quote

 14516700 GU14516700 14 51 67 00
 1451 6700 1451.6700 14.51.67.00

Starter motor deposit, buy this deposit if you are buying one of our reconditioned starter motors and we haven't already received your servicable exchange unit. This deposit will be refunded once we receive your complete reconditionable Valeo or Bosch starter and solenoid

 More than 5 in stock

Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11