Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')

Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606

 This part is available by special order, request a quote

 30660125 GU30660125 30 66 01 25
 3066 0125 3066.0125 30.66.01.25

Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper

Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 17652360 GU17652360 17 65 23 60
 1765 2360 1765.2360 17.65.23.60

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear

Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806

 This part is due back in stock soon, call 01484 841395 to reserve yours

 18652201 GU18652201 18 65 22 01
 1865 2201 1865.2201 18.65.22.01

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Pair of Italian made stainless steel downpipes in a polished finish.

Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16028
Exhaust collets not required
NB does not include exhaust clamps. For clamps see EXA36900

 This part is available by special order, request a quote

14120906+14120901

Pair of Italian made stainless steel downpipes in a satin finish

Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16129
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900

 This part is available by special order, request a quote

14120906+14120901

Pair of Italian made stainless steel downpipes in a satin finish

Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900

 This part is available by special order, request a quote

14120906+14120901

Pair of Italian made stainless steel downpipes in a polished finish

Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900

 This part is available by special order, request a quote

Pair of YSS rear shock absorbers, milled aluminium body with black springs.

Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks

 1 in stock

Pair of YSS rear shock absorbers, milled aluminium body with black springs. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks

Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks

 Order now and we will post your order within 7 days.

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes

 2 in stock