M12 A2 fine thread stainless steel lower crash bar mount bolt for models requiring longer crash bar bolts

 4 in stock

 98621697 GU98621697 98 62 16 97
 9862 1697 9862.1697 98.62.16.97

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

 4 in stock

 96508040 GU96508040 96 50 80 40
 9650 8040 9650.8040 96.50.80.40

Bearing used as UJ carrier bearing on pre 2007 models (see TRA90062 for retaining circlip). Used as outer crownwheel carrier bearing on CARC units

 4 in stock

 92204230 GU92204230 92 20 42 30
 9220 4230 9220.4230 92.20.42.30

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 4 in stock

Dellorto needle clip for VHB square slide and SS1 carbs

 4 in stock

 55938585 GU55938585 55 93 85 85
 5593 8585 5593.8585 55.93.85.85

Black low head M5 socket cap screw, used to secure clock back on many models

 4 in stock

 98830225 GU98830225 98 83 02 25
 9883 0225 9883.0225 98.83.02.25

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 4 in stock

Dellorto mixture screw for PHF36 and PHM40 carbs

Check your mixture screw length as Guzzi used two lengths, this one and the screw in kit FUA93936

 4 in stock

 30936210 GU30936210 30 93 62 10
 3093 6210 3093.6210 30.93.62.10

Threaded straight cable adjuster with M5 thread

Supplied with nut, used for various carb and choke cables cable splitters

 4 in stock

 28607678 GU28607678 28 60 76 78
 2860 7678 2860.7678 28.60.76.78