Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Brake pipe used for supplying front left hand caliper, screws directly into caliper

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

17658860-z 17658860 GU17658860 17 65 88 60
 1765 8860 1765.8860 17.65.88.60

Pad pin kit for Brembo P2 F08 (P8) calipers, consists of two long pins, one short and retaining spring.

replaces old Guzzi part ref. 14659100. Brembo ref. 120274210. NB finish on long pins may be zinc or black

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14659100 GU14659100 14 65 91 00
 1465 9100 1465.9100 14.65.91.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Brakelight switch banjo bolt

See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14657959 GU14657959 14 65 79 59
 1465 7959 1465.7959 14.65.79.59