The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Cali 3 Cali 1100 1994-1997 Brakes

Sort by Title

Sort by Price

Page 2 of 8

1 2 3 4 5 6 7 8

Brake Disc Spring Washer

BRA28860 Fits Cali 3, Cali 1100, Le Mans 1000, Nevada 350, Nevada 750, Spada 3

Dimensions:
22mm ID x 34mm OD

Spring washer for floating discs

10 required per front wheel. See BRA28610 for bobbins and BRA90022 for circlips. Formerly supplied as a belleville spring

part in stock More than 5 in stock

28618860 GU28618860 28 61 88 60
2861 8860 2861.8860 28.61.88.60

£1.60

INC VAT

£1.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA018

BRA54724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
55.7 x 55 x9mm

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock More than 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£19.30

INC VAT

£16.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper P08/F08 Brembo Overhaul Kit

BRA37234 Fits 850/1000 ALL Models, S3, V7 Sport, 750S, Cali 1100 (1994-1997)

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

part in stock More than 5 in stock

14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£29.00

INC VAT

£24.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 99cm

BRA00012 Universal Part

Dimensions:
99cm x 5mm x 8mm

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Brake Pads P08/F08

BRA28601 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
56mm x 54mm x 9mm overall

Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock More than 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

£31.50

INC VAT

£26.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake or Gear Pivot Bolt, Nut and Washer Kit Stainless Steel

SSA98660 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV

Dimensions:
M12

M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut

Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5

part in stock More than 5 in stock

98053660-z 98053660 GU98053660 98 05 36 60
9805 3660 9805.3660 98.05.36.60

£17.50

INC VAT

£14.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Disc Mounting Bobbin

BRA28610 Fits Cali 3, Le Mans 1000

Dimensions:
10.7mm x 22mm OD on section that locates in disc

Stainless steel brake disc mounting bobbin

part in stock 5 in stock

28613560 GU28613560 28 61 35 60
2861 3560 2861.3560 28.61.35.60

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Ball Bearing

ELA92708 Fits Daytona RS, Daytona Racing, 1100 Sport IE, Le Mans 1000, 1000S, Cali 3, Cali 1100 (1994-1997), Cali EV, Centauro, Mille GT, Strada 1000, V35 3, V50 PA, NTX 650, V65 Florida, 750 SP, Strada 750, 750 Targa, 750X, Nevada 750 (1991-2003), Quota 1100, Spada 3, V11 Sport

Dimensions:
3.9mm OD

Ball bearing for brakelight switch

part in stock 5 in stock

92295708 GU92295708 92 29 57 08
9229 5708 9229.5708 92.29.57.08

£0.90

INC VAT

£0.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 8

1 2 3 4 5 6 7 8