Shop headings: New Spares | Used Spares | Accessories | Brands
Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder
Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'
1 in stock
£24.50
INC VAT
£20.42 EX VAT
Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder
NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060
This part is due back in stock soon, call 01484 841395 to reserve yours
£29.50
INC VAT
£24.58 EX VAT
PS 15 rear master cylinder with plastic reservoir
Brembo no. 10.2426.00. Replaces original part with cast reservoir which is no longer available. Also replaces guzzi ref. 29667000. Please note that reservoir is slightly taller than the original, and you may need swap the operating arm from your old master cylinder if this is a different type.
This part is available by special order, request a quote
10438802 GU10438802 10 43 88 02
1043 8802 1043.8802 10.43.88.02
£158.00
INC VAT
£131.67 EX VAT
Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs
This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820
Sorry, this part is no longer available.
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Sorry this item is out of production
Bolt kit containing the mounting and pivot bolts for PS 15 rear brake master cylinders
Also known as Guzzi ref. 17667150, 18659450
Availability varies on this part, check availability
14659450 GU14659450 14 65 94 50
1465 9450 1465.9450 14.65.94.50
£25.00
INC VAT
£20.83 EX VAT
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Brembo M10 bleed nipple kit containing M10 bleed nipple and rubber cap. M10 bleed screw used only on rear of 2003 on models
Brembo no. 98.8249.20
This part is available by special order, request a quote
17659260 GU17659260 17 65 92 60
1765 9260 1765.9260 17.65.92.60
£16.60
INC VAT
£13.83 EX VAT
Pair of Ferodo high performance brake pads FDB148, asbestos free and made in the UK
For P08/F08 calipers. Front and rear pads for all models except P9 equipped 1000 SP where these are only for front calipers
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors
Highest friction level available for motorcycle racing
Developed by world champions for future world champions
Stable friction level achieving excellent modulation
Fast bedding-in period
Applications to fit all major racing calipers
Suitable for stainless steel and cast iron discs
This part is due back in stock soon, call 01484 841395 to reserve yours
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£19.80
INC VAT
£16.50 EX VAT
5 hole disc carrier finished in black
We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3
This part is available by special order, request a quote
28613770 GU28613770 28 61 37 70
2861 3770 2861.3770 28.61.37.70
£33.10
INC VAT
£27.58 EX VAT