The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Zinc finish M8 flanged screw

Front brake disc bolt on some models- checks parts book for exact listing. Some models use longer BRA81286 instead which is M8 x 20mm

 4 in stock

AP8152285

Black rubber grommet with various applications including screen mounting and master cylinder mount

 4 in stock

 91551167 GU91551167 91 55 11 67
 9155 1167 9155.1167 91.55.11.67

Hex head brake disc bolt, mainly used for rear brake disc but also used for frame applications

Also known as Guzzi ref. 597150, 6 bolts required per disc

 4 in stock

 98682425 GU98682425 98 68 24 25
 9868 2425 9868.2425 98.68.24.25

Pair of EBC FA266 rear brake pads for late type Brembo caliper

Single pin fitting. 2013 onwards V7 models have different two pin pads.

 3 in stock

31654681-z 31654681 GU31654681 31 65 46 81
 3165 4681 3165.4681 31.65.46.81

Rubber brake cable sleeve for lower end of cable

 3 in stock

12626300-z 12626300 GU12626300 12 62 63 00
 1262 6300 1262.6300 12.62.63.00

Kit consisting of black plastic cap and rubber cap seal for PS 12 round handlebar master cylinders and single horizontal outlet remote reservoirs (e.g. BRG19901 )

Also known as Guzzi ref. 17661052, 10271110. Brembo ref. 110430830. This is the smaller of the two round master cylinder caps used on V35, V50, V65 and 850/1000 models

 3 in stock

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

 3 in stock

 19659500 GU19659500 19 65 95 00
 1965 9500 1965.9500 19.65.95.00

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 3 in stock

Also fits Cagiva Elefant E750, Ducati 748

Pair of EBC FA209 brake pads, used for front brake pads on Quota and Bellagio, rear brake pads for Cali 1400, Cali EV, Cali Stone, Cali Jackal and Special. All use Brembo PF2.3032 caliper

Also known as Guzzi ref. 30654626, AP8113627

 3 in stock

03654600-z 03654600 GU03654600 03 65 46 00
 0365 4600 0365.4600 03.65.46.00