The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Breva 1100 1200 Sport Norge Griso Engines

Sort by Title

Sort by Price

Page 14 of 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Roller Tappet Conversion Kit A

ENA02060 Fits Griso 1200, Norge 1200, Stelvio

Roller tappet kit A for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.20 from 2013. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

This part is available by special order, request a quote

1A002060

£1,040.00

INC VAT

£866.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Roller Tappet Conversion Kit B

ENA02063 Fits Griso 1200, Norge 1200, Stelvio

Roller tappet kit B for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.02 from 2014. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

This part is available by special order, request a quote

1A002063

£975.00

INC VAT

£812.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Roller Tappet Conversion Kit C

ENA02082 Fits 1200 Sport (4v/cyl), Griso 1200, Stelvio

Roller tappet kit C for converting your 4 valve per cylinder model to the later rollerised tappets

All 4v/cyl 1200 Sport models use this kit.

For Griso and Stelvio your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.02 from 2014. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

This part is available by special order, request a quote

1A002082

£1,600.00

INC VAT

£1333.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Rubber Cap Oil Pressure Switch

ENA12600 Universal Part

Dimensions:
15mm ID at wide end x 34mm

Rubber cap for oil pressure switch

part in stock 2 in stock

12717600 GU12717600 12 71 76 00
1271 7600 1271.7600 12.71.76.00

£3.00

INC VAT

£2.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Rubber Washer

ENA83249 Fits Stelvio, Griso 1200, 1200 Sport (4 valves per cylinder) , Norge (4 valves per cylinder)

Rubber washer / damper for rocker cover screw

part in stock More than 5 in stock

830249 MG830249

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Sealing Washer

SIA97497 Fits 1200 Sport (4 valves per cylinder), Cali 1400, Norge 1200 (4 valves per cylinder), Stelvio

Dimensions:
18mm outer diameter x 14mm inner diameter x 1.5mm

Sealing washer with rubber insert used for head oil feed pipes

part in stock More than 5 in stock

976597 MG976597

£0.80

INC VAT

£0.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Sealing Washer Aluminium

ENA01528 Fits Breva ALL, Cali 1400 ALL, Griso ALL, MGS-01, Norge ALL, 1200 Sport ALL, Stelvio, V11 Sport ALL. Bellagio

Dimensions:
18mm OD x 10.7mm ID x 1.5mm

Aluminium crush washer with rubber insert

This washer is used to seal the engine sump, drive box and gearbox drain plugs on the Cali 1400

part in stock More than 5 in stock

01528930 GU01528930 01 52 89 30
0152 8930 0152.8930 01.52.89.30

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Sealing Washer Aluminium

ENA01230 Fits Breva 850, Breva 1100, Breva 1200, Cali 1400, Griso ALL, MGS-01, Norge ALL, 1200 Sport ALL, Stelvio, V11 Sport ALL

Dimensions:
23mm OD x 16mm ID x 2mm

Aluminium crush washer with rubber insert

Can be used in place of Guzzi ref. 10154200

part in stock More than 5 in stock

01154230 GU01154230 01 15 42 30
0115 4230 0115.4230 01.15.42.30

£1.50

INC VAT

£1.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Sensor Gasket

ENA29760 Fits Breva ALL, Bellagio, Cali EV, Cali Jackal, Cali Stone, Cali Vintage, Cali 1100, Centauro, Daytona ALL, Griso ALL, MGS-01, Nevada 750 (2004-), Norge ALL, 1200 Sport ALL, V11 Sport ALL

Dimensions:
0.5mm thickness

Metal gasket for phase sensor

See ENA90141 for sealing O ring.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

29722760 GU29722760 29 72 27 60
2972 2760 2972.2760 29.72.27.60

£3.20

INC VAT

£2.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Service Oil Kit

OIA08002 Fits 1200 Sport ALL, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio ALL

Kit containing 4 Litres of ENI i-Ride Racing SAE10W-60 synthetic engine oil and 1 litre of Extreme Pressure gearbox and drivebox oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil.

Please note this kit CANNOT be posted outside of the UK mainland area

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£73.00

INC VAT

£60.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 14 of 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18