Valve guide

Also known as Guzzi ref. 13036800, 13036900, 13036700, 14036860, 13036801. See ENA90353 for valve guide circlips

 5 in stock

 14036860 GU14036860 14 03 68 60
 1403 6860 1403.6860 14.03.68.60

Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head

Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602

 5 in stock

 14153660 GU14153660 14 15 36 60
 1415 3660 1415.3660 14.15.36.60

Rubber grommet for clutch bell housing / flywheel timing hole

Timing hole plug or timing hole bung. Also used to fill holes used to mount Griso factory luggage rack

 5 in stock

93180220-z 93180220 GU93180220 93 18 02 20
 9318 0220 9318.0220 93.18.02.20

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 5 in stock

Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe

Use hose clip FUA00004

 5 in stock

4 litres of fully synthetic ZFS 4T SAE 20W-50 engine oil. Moto Guzzi specify this oil grade for non PI Cali EV models. This is latest generation synthetic oil which gives best protection for your engine, even at extreme temperatures. The special formulation ensures great thermal and shear stability

• Constant high friction profile for wet clutch performance meeting the JASO MA2 specification
• A fully synthetic base oil and additives provide high temperature endurance
• Optimisation for four-stroke engines to give cleanliness and improved operation
• Excellent oxidation resistance and valve train-wear protection
• Seal compatibility
  
  PERFORMANCE PROFILE: API SN, SM, SL, SJ JASO MA2, JASO MA1, JASO MA
  Quantities required:
  • Cali 1100, Cali EV- 3.0l, V11 Sport, Daytona RS, 1100 Sport IE and Centauro - engine 3.5l
  
  
  See ENA41653 for a oil drain kit for your oil change.
  Please note this part CANNOT be posted outside of the UK mainland area.

   5 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Head Gasket

 4 in stock

 30022060 GU30022060 30 02 20 60
 3002 2060 3002.2060 30.02.20.60

High pressure black fuel line / fuel line

Also known as Guzzi ref. 008239520800, 00823941078, GU00823952080. This high pressure fuel hose is rated to 10 Bar. Also see FUA80000 of a Y shaped connector or FUA80001 for a T shaped fuel line connector. R7 spec. E5 and E10 ethanol resistant

 4 in stock

823952080

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

 4 in stock

 98052475 GU98052475 98 05 24 75
 9805 2475 9805.2475 98.05.24.75

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

 4 in stock

 96508040 GU96508040 96 50 80 40
 9650 8040 9650.8040 96.50.80.40