The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Engines

Sort by Title

Sort by Price

Page 10 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Springs Distributor Advance

ENA28950 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, 1000S, V7 Sport, 750S, S3, 850T, Cali 3 (Big valve)

Dimensions:
Springs are 23mm and 24mm respectively

Pair of timing springs for mechanical advance/retard mechanism

1 pair of distributor springs required per engine. Also known as Guzzi ref. 28753960, 28753960, 14715431. These are a finer grade wire than the springs used on the low compression models

part in stock 4 in stock

28753950 GU28753950 28 75 39 50
2875 3950 2875.3950 28.75.39.50

£10.20

INC VAT

£8.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil or Breather Pipe

ENA95136 Fits V7 Sport, 750S, S3, 850/1000 ALL Models

Dimensions:
13mm ID x 18mm OD x 660mm

Length of pipe used for oil return and breather applications depending on model

Also known as Guzzi ref. 12157600. This pipe has an outside diameter slightly larger than the original so will not fit through the hose support bracket on some models

part in stock 4 in stock

95985136 GU95985136 95 98 51 36
9598 5136 9598.5136 95.98.51.36

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

M8 Bolt Hex Head 75mm Stainless Steel

SSA08075 Fits V35 II, V35 3, V35C, V50C, V50 3, Monza, Le Mans 2, Le Mans 3, Cali 3, 1000S, Le Mans 1000, 1100 Sport, V11 Sport, Daytona, Centauro, Cali 1100 (1994-1997), Cali EV, Quota 1100

Dimensions:
M8 x 75mm

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

part in stock 4 in stock

98052475 GU98052475 98 05 24 75
9805 2475 9805.2475 98.05.24.75

£1.40

INC VAT

£1.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud Kit Stainless Steel

SSA96040 Fits S3, 850/1000 ALL Models, 1100 Sport, V11 Sport, V7 Sport, S3, Cali 1100 (1994-1997), Cali EV ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport (2v/cyl), Griso 850, Griso 1100, Norge 850, Norge 1200 (2v/cyl)

Dimensions:
M8 x 40mm studs

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

part in stock 4 in stock

96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Alternator Rotor Removal Tool

TOA14008 Fits Cali 2, T3, 750S, S3, 850T, T4, T5 (Series 1), Convert, G5, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT (Series 1), V35, V35C, V35 Florida, Imola 2, V35 TT, V50, Monza, V65, V7 Sport

Stainless steel tool for removing Bosch alternator rotor. Will also fit Saprisa.

Simply screw in until the rotor pops off

part in stock 4 in stock

Also fits Benelli Sei 900 (Series 2)

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Head Gasket

ENA18027 Fits 1000 SP (92mm bore), G5 (92mm bore), Convert (92mm bore), Le Mans 1 (92mm bore), Le Mans 2 (92mm bore), T3 (92mm bore), T4 (92mm bore), 850T (92mm bore)

Dimensions:
92mm ID

Special head gasket for round barrel engines

92mm bore for cylinders that have been taken out to 92mm, e.g. Raceco conversions

part in stock 3 in stock

£17.80

INC VAT

£14.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Valve Inlet

ENA30037 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (1994-1997), Mille GT, Quota, Spada 3, 1000S (1993), Cali 3 (PHF 36 carbs), Strada 1000, Quota ALL, Cali EV, Cali Jackal, Cali Stone

Dimensions:
44mm valve diameter, 8mm diameter stem, 106mm overall height

44mm inlet valve

Also known as Guzzi ref. 03036000

part in stock 3 in stock

14036050 GU14036050 14 03 60 50
1403 6050 1403.6050 14.03.60.50

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Tab Washer

ENA95006 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, 1100 Sport ALL, V11 Sport ALL, V35 ALL, V50 ALL, V65 ALL, Quota 1100, Bellagio, Centauro, Daytona, Breva 750, V7 Classic, MGS-01