Shop headings: New Spares | Used Spares | Accessories | Brands
M5 flanged screw, many applications including rocker cover trim on pre 2014 V7 small twins
See FRA81505 for this screw in a black finish
2 in stock
AP8152339
£1.50
INC VAT
£1.25 EX VAT
Pair of black steel brackets for mounting the nose cowling FAA14575
Requires a hex head bolt for the headlight fixing e.g. SSA08016 (depending on headlight)
1 in stock
14578651-z 14578651 GU14578651 14 57 86 51
1457 8651 1457.8651 14.57.86.51
£39.00
INC VAT
£32.50 EX VAT
Dimensions:
227mm vertical mounting centres, 700mm at widest point, 470mm from above headlamp to top edge
Large tinted screen with chrome edging
Use fitting kit FAA60008.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike.
Note that due to the tight radius of the chome trim the finish may not be perfectly smooth
1 in stock
29577350 GU29577350 29 57 73 50
2957 7350 2957.7350 29.57.73.50
£77.20
INC VAT
£64.33 EX VAT
Black right hand fairing mounted mirror
1 in stock
£22.20
INC VAT
£18.50 EX VAT
Black left hand fairing mounted mirror
1 in stock
£22.20
INC VAT
£18.50 EX VAT
Dimensions:
203mm vertical mounting centres, 580mm wide at widest point, 550mm top to above headlight
Tinted standard size screen with mounting holes and beaded edge
Mount this screen using the following parts: FAA60001A (chrome) or FAA60001G (black) + upper arms FAA60001D
See FAA60001B if you just need the screen mounting screws.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike
1 in stock
18577350 GU18577350 18 57 73 50
1857 7350 1857.7350 18.57.73.50
£90.00
INC VAT
£75.00 EX VAT
Pair of black steel yoke brackets for fitting screen FAA60001
Upper fitting kit (FAA60001D) and bolts for these brackets (FAA60001C) also required
1 in stock
18506851-z 18506851 GU18506851 18 50 68 51
1850 6851 1850.6851 18.50.68.51
£37.00
INC VAT
£30.83 EX VAT
Standard grey tinted screen for headlamp fairing. Includes screen edge trim.
Fitting kits available separately. Screen fasteners are FAA98417 x 3, FAA04001 x 6, FAA90035 x 3, FAA92104 x 3
1 in stock
14577250-z 14577250 GU14577250 14 57 72 50
1457 7250 1457.7250 14.57.72.50
£54.00
INC VAT
£45.00 EX VAT
Left hand bare replica side panel or battery cover ready for priming and painting. Fabricated in fibreglass with steel clips for the top mounting points
This is a replica part, there may be minor differences between this part and the original Moto Guzzi part. Side panel rubbers FRA39461 and FRA91551 available separately
1 in stock
14476350-z 14476350 GU14476350 14 47 63 50
1447 6350 1447.6350 14.47.63.50
£70.00
INC VAT
£58.33 EX VAT
Black fairing and screen screw kit containing ten black M6 cross head screws, nuts and washers
1 in stock
98326013 GU98326013 98 32 60 13
9832 6013 9832.6013 98.32.60.13
£6.60
INC VAT
£5.50 EX VAT