Pair of chromed Hepco and Becker pannier rails for Hepco and Becker panniers. Supplied with fitting hardware and chromed cross brace
Pair pannier racks
1 in stock
£320.00
INC VAT
£266.67 EX VAT
Brembo caliper cover for models with obsolete twin bleed calipers
P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins
More than 5 in stock
20325410 GU20325410 20 32 54 10
2032 5410 2032.5410 20.32.54.10
£11.00
INC VAT
£9.17 EX VAT
Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe
Use hose clip FUA00004
More than 5 in stock
£7.00
INC VAT
£5.83 EX VAT
Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.
Supplied with long leads for battery and alternator connection. Female spades for alternator and charge sensing, ring connectors for battery. NB this reg/rec should not be used with a lithium-ion battery
1 in stock
£140.00
INC VAT
£116.67 EX VAT
One piece collet for exhaust manifold, one required per cylinder
No longer in production
2 in stock
14121200 GU14121200 14 12 12 00
1412 1200 1412.1200 14.12.12.00
£15.00
INC VAT
£12.50 EX VAT
5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications
Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket
5 in stock
19732500-z 19732500 GU19732500 19 73 25 00
1973 2500 1973.2500 19.73.25.00
£15.20
INC VAT
£12.67 EX VAT
Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers
On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032
4 in stock
96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40
£21.00
INC VAT
£17.50 EX VAT
Brakelight switch for handlebar mounted master cylinder
Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815 or ELA30860. Sometimes supplied with three terminals, in this instance disregard middle terminal. Please note that terminals are smaller than standard switch and will need to be soldered on.
3 in stock
30749860 GU30749860 30 74 98 60
3074 9860 3074.9860 30.74.98.60
£13.50
INC VAT
£11.25 EX VAT
Brakelight switch
Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw
2 in stock
03749845-z 03749845 GU03749845 03 74 98 45
0374 9845 0374.9845 03.74.98.45
£15.50
INC VAT
£12.92 EX VAT
5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications
Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket
5 in stock
19732500-z 19732500 GU19732500 19 73 25 00
1973 2500 1973.2500 19.73.25.00
£15.20
INC VAT
£12.67 EX VAT