Dellorto accelerator pump diaphragm for PHF and PHM carbs

Also known as Guzzi ref 075527555

 2 in stock

 14931050 GU14931050 14 93 10 50
 1493 1050 1493.1050 14.93.10.50

Replacement steering lock with 2 keys, fits into headstock

See FRA28551 for the steering lock cover flap and rivet. Also known as Guzzi ref. 12782830, 19782520

 4 in stock

 28782550 GU28782550 28 78 25 50
 2878 2550 2878.2550 28.78.25.50

Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models

Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )

 More than 5 in stock

 90413850 GU90413850 90 41 38 50
 9041 3850 9041.3850 90.41.38.50

1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

 More than 5 in stock

Sealed ball bearing used as rear wheel bearing for cast and spoked wheels

2 bearings required per wheel. Also used as front wheel bearing in spoked wheels on these models: Cali 1100, S3, T3, G5, Mille GT, Cali 3, Convert, Strada 1000, 1000S, Cali Jackal, Cali Stone, Cali Special (tube rim), Cali Vintage (tube rim), Cali Classic (2006-2007), 850 GT (disc braked version). Front wheel only for 750S / V7 Sport.

 More than 5 in stock

92204220-z 92204220 GU92204220 92 20 42 20
 9220 4220 9220.4220 92.20.42.20

Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers

 More than 5 in stock

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

 More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
 9040 5367 9040.5367 90.40.53.67

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

 More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527