Shop headings: New Spares | Used Spares | Accessories | Brands
56 Results - Page 2 of 6
Dimensions:
65mm overall length
Rubber indicator stem with triangular foot for indicators LIA28670 LIA28678 LIA29753 and LIA29752
Attaches to bike via 2 x M6 screws
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is sold out
£12.00
INC VAT
£10.00 EX VAT
Left hand 'lego' handlebar switchgear. Includes flash / horn switch, indicators and lights selector
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is no longer available.
18738062 GU18738062 18 73 80 62
1873 8062 1873.8062 18.73.80.62
Prices from
£30.00 - £60.00
inc VAT dependent on condition
Left hand handlebar switchgear, CEV / Domino type with integrated clutch lever clamp.
Horn, indicators, lights and pass functions
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
We need to check whether we have stock of this part, check availability
Prices from
£24.00 - £75.00
inc VAT dependent on condition
Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.
We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit
This part is due back in stock soon, call 01484 841395 to reserve yours
£198.00
INC VAT
£165.00 EX VAT
Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes
2 in stock
£205.00
INC VAT
£170.83 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
5 pin 12 volt relay suitable for starter indicator, flasher and horn applications
Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
46 in stock
19732500 GU19732500 19 73 25 00
1973 2500 1973.2500 19.73.25.00
£2.00
INC VAT
£1.67 EX VAT
Dimensions:
70mm overall diameter, 57mm mounting centres
Round CEV amber indicator lens
Mounts using two screws (not supplied). Also known as Guzzi ref. 39753771 and 14753750
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
31 in stock
39753770 GU39753770 39 75 37 70
3975 3770 3975.3770 39.75.37.70
£3.00
INC VAT
£2.50 EX VAT
Stainless steel M6 dome head nut, many applications
Many applications including indicator mounting and securing exhaust flanges on V7 models
More than 5 in stock
92787006 GU92787006 92 78 70 06
9278 7006 9278.7006 92.78.70.06
£1.20
INC VAT
£1.00 EX VAT
Indicator mounting bracket
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
18 in stock
14751355 GU14751355 14 75 13 55
1475 1355 1475.1355 14.75.13.55
£12.00
INC VAT
£10.00 EX VAT