Matte black seat cowl for that single seat look. Manufactured in the UK from ABS this quality part will enhance and protect the seat on your V100

Easily installed within seconds

 1 in stock

Light smoke screen with handlebar mounting brackets

Manufactured from 3mm high impact acrylic this screen offers stylish weather protection. Easily fitted to your handlebars using the supplied brackets.

 1 in stock

This handlebar riser kit moves the handlebars up by 35mm resulting in much improved comfort. Finished in black, this is a high quality Italian engineered kit. For yokes with 32-35mm clamp bolt centres

Kit contains fitting instructions, zinc finish bolts, bolt head plugs and risers. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit

 1 in stock

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10433 and V-Twin Boost - ACA85001 or ACA85002.

Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock

Black stainless steel exhaust cover for the exhaust link pipe and CAT. Fits easily to the standard exhaust system to improve the styling of the V100. This brushed stainless finish cover also helps shield your feet from the heat of the CAT. This shorter cover is compatible with a centre stand.

A quality accessory hand made in Italy for your V100

 1 in stock

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Ducati's. Modern Ducati's run particularly lean and will benefit particularly from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock

Also fits 748 2000 – 2003, 748S 2001 – 2003, 748R 2001 – 2003, 749 2003 – 2007, 749 DARK 2003 – 2007, 749R 2003 – 2007, 749S 2003 – 2007, 996 Biposto 1998 – 2001, 996 S 1998 – 2001, 999 2002 – 2006, 999 R 2002 – 2006, 999 S 2003 – 2006, 848 2007 – 2013, 848 EVO 2010 – 2013, 848 EVO Corse SE 2010 – 2013, 1098 2006 – 2009, 1098 S 2006 – 2012, 1098 R 2007 – 2011, 1098 R Bayliss 2009 – 2011, 1198 2008 – 2012, 1198 S 2008 – 2012, 1198 S Corse SE 2008 – 2012, 1198 R Corse SE 2009 – 2012, 1198 SP 2010 – 2012, 1199 Panigale R 2013, Hypermotard 796 2009 – 2012, Hypermotard 1100 EVO 2010 – 2012, Hypermotard 1100 EVO SP 2010 – 2012, Hypermotard 821 2013 – 2015, Hypermotard 821 SP 2013 – 2015, Hyperstrada 821 2013 – 2015, Hypermotard 939 2016 –, Hypermotard 939 SP 2016 –, Hyperstrada 939 2016 –, Scrambler 800 (tutte le varianti), Street Fighter 848 2011 – 2015, Street Fighter 1098 2008 – 2014, Street Fighter 1098 S 2008 – 2014, MH900 2000 – 2002, MH900 Evoluzione 2001 – 2002, Monster 900 IE 1999 – 2002, Monster 696 2008 – 2013, Monster 696+ 2007 – 2014, Monster 696 ABS 2009 – 2014, Monster 796 2010 – 2013, Monster 796 ABS 2010 – 2014, Monster 1100 2008 – 2011, Monster 1100 S 2008 – 2011, Monster 1100 EVO 2010 – 2013, Monster 821 2014 –, Monster 821 Dark 2014 – 2016, Monster 821 Stripe 2014 –, Monster 797 2017 –, Monster 797 + 2017 –, Monster 1200 2013 –, Monster 1200 S 2013 –, Monster 1200 S Stripe 2013 –, Monster 1200 R 2016 –, Multistrada 1000 DS 2003 – 2006, Multistrada 1000 S DS 2004 – 2006, Multistrada 1100 2006 – 2009, Multistrada 1100 S 2006 – 2009, Multistrada 620 2005 – 2007, Multistrada 620 Dark SD 2005 – 2007, Multistrada 1200 2015 – (motore DVT), Multistrada 1200 S 2015 – (motore DVT), Multistrada 1200 S D-Air 2015 – (motore DVT), Multistrada 1200 Pikes Peak 2015 – (motore DVT), Multistrada 1200 Enduro 2017 – (motore DVT), Multistrada 950 2017 –, SuperSport 750 i.e. 1999 – 2003, SuperSport 750 Sport i.e. 1999 – 2003, SuperSport 900 i.e. 1998 – 2003, SuperSport 900 Sport i.e. 1998 – 2003 SuperSport 939 2017 –, SuperSport 939 S 2017 –, ST2 1997 – 2003, ST3 2003 – 2007, ST3 S ABS 2003 – 2007, ST4 1999 – 2003, ST4S 2001 – 2005, ST4S ABS 2003 – 2005

Silver finish front engine guard to protect the front cover of you V100 from stone cips and corrosive road grime. Fit now before damage occurs

This engine cover manufactured is from AW5083 aluminium for toughness. Fit in conjunction with a EXTRA Fenda Extenda ACA58780 for maximum protection.

 1 in stock

Matte black finish front engine guard to protect the front cover of your V100 from stone cips and corrosive road grime. Fit now before damage occurs

This engine cover is manufactured from AW5083 aluminium for toughness. Fit in conjunction with a EXTRA Fenda Extenda ACA58780 for maximum protection.

 1 in stock

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock

Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours

 1 in stock