Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.

NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722

 2 in stock

 20391310 GU20391310 20 39 13 10
 2039 1310 2039.1310 20.39.13.10

Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)

Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper

Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 17652360 GU17652360 17 65 23 60
 1765 2360 1765.2360 17.65.23.60

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear

Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806

 This part is due back in stock soon, call 01484 841395 to reserve yours

 18652201 GU18652201 18 65 22 01
 1865 2201 1865.2201 18.65.22.01

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Black PS 12 master cylinder (original round type). Supplied without lever. Currently unavailble- see BRA28278 for an alternative master cylinder.

Also known as Guzzi ref. 28660178, uses seal kit BRA14701 and lever BRA14605 (or BRA17606). Replaces Guzzi refs. 17660250, 17660252, 14660200, 082054335. Can be used to upgrade cable operated front master cylinder on V35 I, V50 I and V50 II models. also suitable for 750S

 1 in stock

 17660253 GU17660253 17 66 02 53
 1766 0253 1766.0253 17.66.02.53

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs.
No longer available - superceded by BRA14901

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338.

See BRA14102 for alternative aluminium cap

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Rubber bleed nipple cap with retaining ring

Suitable only for M6 bleed nipples

 More than 5 in stock

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec