The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Le Mans Fuel and Carburettors

Sort by Title

Sort by Price

Page 11 of 12

1 2 3 4 5 6 7 8 9 10 11 12

Inlet Manifold Rubber Late PHM 40

FUA28361 Fits 850/1000 ALL Models, 1100 Sport Carb

Dimensions:
45mm ID x 38mm length

Special Inlet rubber with HT lead guide for late Dellorto PHM carbs with a inlet stub OD of 46mm

Use clip SSA45970
This part will only fit late PHM40 carbs with 46mm inlet stubs, we recommend measuring your carbs before ordering

part in stock 1 in stock

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Petrol Tap Original Type

TAA14400 Fits V7 Sport, Le Mans 1, 750S, S3

Dimensions:
M16 x 1 threaded section, 8mm fuel pipe spigot

Manual square bodied fuel tap with nut, washer and filter. Fits left or right hand side of tank.

Off, on and reserve positions. Approved for use with fuel containing ethanol.

variable availability Availability varies on this part, check availability

14105400-z 14105400 GU14105400 14 10 54 00
1410 5400 1410.5400 14.10.54.00

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Original Plastic Bellmouth Intake PHF

FUA12001 Fits Le Mans 1, Le Mans 2

Dimensions:
46mm ID

Original Le Mans type bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter.

Perfect for a 'better than new' Le Mans 1 or 2 restoration. Black finish

This part is available by special order, request a quote

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30613 Fits Le Mans 1000, 1000S

Dimensions:
46mm ID where carb enters manifold

Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHM 40 carb conversions on models previously fitted with smaller carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30612 Fits Le Mans 1, Le Mans 2, Spada 3, Strada 1000, Cali 3 Classic, Cali 1100 Carb

Dimensions:
Accepts a 44mm OD carb

Plastic inlet manifold, replaces unavailable aluminium manifold. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. PHF36 carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Short Alloy Bellmouth Intake PHF

ACA12001 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (carb), Cali 3 (PHF model), Spada 3, Strada 1000

Dimensions:
46mm ID, 45mm long

Short alloy bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter

part in stock 2 in stock

£46.00

INC VAT

£38.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Short Alloy Bellmouth Intake

ACA12004 Fits Le Mans 1000, 1100 Sport Carb, 1000S

Dimensions:
50mm ID, 45mm long

Short alloy bellmouth intake / trumpet with mesh for Dellorto PHM 40 carb, screws to rear of carb replacing air filter

part in stock 2 in stock

£46.00

INC VAT

£38.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Long Alloy Bellmouth Intake

ACA12005 Fits Le Mans 1000, 1100 Sport Carb, 1000S

Dimensions:
50mm ID, 70mm long

Long alloy bellmouth intake / trumpet with domed mesh for Dellorto PHM 40 carb, screws to rear of carb replacing air filter

This part is available by special order, request a quote

£48.00

INC VAT

£40.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Long Alloy Bellmouth Intake PHF

ACA12002 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (carb), Cali 3 (PHF model), Spada 3, Strada 1000

Dimensions:
46mm ID, 70mm long

Long alloy bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter

part in stock 2 in stock

£52.00

INC VAT

£43.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Performance Air Filter K & N

SIA28367 Fits Le Mans 1000, Cali 3, Strada 750, Spada 3, 1000S, Lario, Imola 2, Monza 2, V75 4 Valve

Dimensions:
150mm x 110mm x 47mm

K&N high performance air filter

High Air Flow with Excellent Filtration
Designed to Increase Horsepower and Acceleration
Washable and Reusable
Will NOT Void Vehicle Warranty
Lasts up to 50,000 miles before cleaning is required depending on driving conditions
K&N Million Mile Limited Warrantyï¿½
Emissions Legal
Economical, a K&N Air Filter Will Last the Life of Your Bike
Works with Original Equipment Manufacturer Vehicle Electronics
Easy High Performance Add-on
Environmentally Friendly

This part is available by special order, request a quote

28113660-z 28113660 GU28113660 28 11 36 60
2811 3660 2811.3660 28.11.36.60

£67.00

INC VAT

£55.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 11 of 12

1 2 3 4 5 6 7 8 9 10 11 12