Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

 More than 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.

NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722

 2 in stock

 20391310 GU20391310 20 39 13 10
 2039 1310 2039.1310 20.39.13.10

Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)

Stainless steel tool for removing Bosch alternator rotor. Will also fit Saprisa.

Simply screw in until the rotor pops off

 4 in stock

Also fits Benelli Sei 900 (Series 2)

Replacement alternator brushes or brush kit for Bosch alternators

Also known as Guzzi ref 17712453

 More than 5 in stock

14712453-z 14712453 GU14712453 14 71 24 53
 1471 2453 1471.2453 14.71.24.53

Also fits Benelli 900 Sei (Series 2)

High quality German made Mahle OE quality cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring

 More than 5 in stock

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

1 litre of fully synthetic ENI i-Ride 4T Racing SAE 10W-60 engine oil. Moto Guzzi specify this oil for 2004 on small twins, 2006 on Cali EV models and all Breva, Norge, Stelvio, 1200 Sport and Griso models. This is latest generation synthetic oil which gives best protection for your engine, even at extreme temperatures. The special 10w60 formulation ensures great thermal and shear stability

ENI rated API SL. Suitable for sport and racing use.

Quantities required:
• 1200 Sport, Breva 1100, 1200, Griso, Norge, Stelvio, Cali EV - engine: 3.6l
• Cali 1400 - engine 4.01l
• Bellagio - engine: 3l
• Breva 750, Nevada 750 (2004 on), V7 Classic - engine: 2l

 3 in stock

Lower Gasket for oil sump flange

See ENA14036 for upper sump flange gasket

 More than 5 in stock

01003600-z 01003600 GU01003600 01 00 36 00
 0100 3600 0100.3600 01.00.36.00

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   More than 5 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe

Use hose clip FUA00004

 More than 5 in stock

Choke cable for remote left cylinder mounted choke, fits both carbs

Alternative for Le Mans models that were fitted with the shorter version of the choke cable. We advise you to measure your existing cable before ordering in case you have a non standard set up. See CAA28133 for long version.

 3 in stock

28133500-Z