A2 stainless socket cap screw M10 x 30, used for F08/P8 and P9 brake caliper bolts

Also used for front lower frame rail bolts on V7 Classic, V7 Cafe etc... Can be used in place of reduced head bolt Guzzi ref. 03530530 and 564632 and 887878 . Can also be used in place of hex head bolt Guzzi ref. 98054530

 More than 5 in stock

 98682530 GU98682530 98 68 25 30
 9868 2530 9868.2530 98.68.25.30

A2 stainless socket cap screw M10 x 25, used for headlamp mount, F08 / P8 lower front caliper mounting and other applications

Lower front caliper bolt on many Tonti models

 More than 5 in stock

A2 stainless socket cap button head screw M6 x 10

Can be used in place of GU98210612

 More than 5 in stock

 98370612 GU98370612 98 37 06 12
 9837 0612 9837.0612 98.37.06.12

Dellorto K18 slide needle

Standard needle clip position is 3rd groove from top

 This part is due back in stock soon, call 01484 841395 to reserve yours

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

 1 in stock

95990028-z 95990028 GU95990028 95 99 00 28
 9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

Sidestand spring, two required on most models

Short type

 2 in stock

17434060-z 17434060 GU17434060 17 43 40 60
 1743 4060 1743.4060 17.43.40.60

Long sidestand spring

2 required for some stands

 More than 5 in stock

19434000-z 19434000 GU19434000 19 43 40 00
 1943 4000 1943.4000 19.43.40.00

Side stand mounting bolt with shoulder

 Sorry, this part is no longer available.

 99105129 GU99105129 99 10 51 29
 9910 5129 9910.5129 99.10.51.29

Complete cast side stand kit with springs, pivots and mounting brackets finished in black. This kit is supplied with two sidestand brackets so you can mount the stand in either the standard position under the riders footpeg, or in the forward position on the engine mounting bolt (for a Le Mans style getaway).

This stand is supplied ready for fitting in the forward position, swap supplied brackets and spring brackets to mount in the rear position under the rider's footpeg

Bolts to either engine mounting bolt at front of lower framerail (check that you have a long enough front engine mounting bolt for this sidestand to fit on to) or the lower frame rail. This can be fitted to other Tonti frame models with footpegs (e.g. Le Mans 2, Le Mans 3, T3, T4).
Requires final paint finish before fitting. Supercedes Guzzi ref. 28432161

 Availability varies on this part, check availability

 28432160 GU28432160 28 43 21 60
 2843 2160 2843.2160 28.43.21.60

Complete cast side stand with springs, pivot and mounting bracket finished in black. This stand is the original flip up / self retracting type

Bolts to engine mounting bolt at front of lower framerail, check that you have a long enough front engine mounting bolt for this sidestand to fit on to. This can be fitted to other Tonti frame models (e.g. Le Mans 1000). See FRA28162 for bracket that enables this stand to be mounted near the rider's footrest using the gearbox mounting bolt.

 1 in stock

17432060-z 17432060 GU17432060 17 43 20 60
 1743 2060 1743.2060 17.43.20.60