The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Daytona Centauro MGS-01 All Categories

Sort by Title

Sort by Price

Page 17 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Temperature Sensor Oil

ELA29961 Fits 1200 Sport, Bellagio, Breva ALL. Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Griso ALL, Norge ALL, Stelvio, Quota 1100, Centauro, Daytona, V11 Sport, V7 Classic, V7 Cafe, V7 Racer, Nevada 750 (2004-2013), Cali 3 IE, V7 II ALL

Dimensions:
M12 thread

Oil temperature sensor

See ELA03330 for sensor support

part in stock 1 in stock

29724961 GU29724961 29 72 49 61
2972 4961 2972.4961 29.72.49.61

£30.00

INC VAT

£25.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Pushrod

CLA14085 Fits 850/1000 All Models, Cali 1100 (1994-1997), Cali EV, 1100 Sport ALL, Quota 1100, Centauro, Daytona

Dimensions:
246mm x 6mm

Clutch pushrod

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14085700 GU14085700 14 08 57 00
1408 5700 1408.5700 14.08.57.00

£30.00

INC VAT

£25.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Sensor Fuel Level

ELA30010 Fits 1100 Sport Carb, Daytona

Fuel level sender for fuel tank

2 pin connector block

This part is available by special order, request a quote

30103000 GU30103000 30 10 30 00
3010 3000 3010.3000 30.10.30.00

£29.80

INC VAT

£24.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Single Banjo Fine Thread Stainless Steel

BRA01004 Universal Part

Dimensions:
M10 single banjo fine thread

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

part in stock 1 in stock

£29.50

INC VAT

£24.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Wheel Spindle Bearing Inner

TRA92025 Fits 1100 Sport ALL, Centauro, V11 Sport

Dimensions:
19.7mm ID x 18mm

Bearing carrier for outermost drive box bearing 92252225 TRA92522

part in stock 1 in stock

92259025 GU92259025 92 25 90 25
9225 9025 9225.9025 92.25.90.25

£28.80

INC VAT

£24.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Bush

SUA30515 Fits 1100 Sport Carb, Daytona 1000, Quota ALL

Dimensions:
40mm ID x 42mm OD x 15mm

Fork bush

Sorry this part is no longer available Sorry, this part is no longer available.

30530515 GU30530515 30 53 05 15
3053 0515 3053.0515 30.53.05.15

this part is no longer available
Sorry this item is out of production

Choke Cable

CAA02131 Fits Centauro GT, Centauro Sport

Dimensions:
975mm outer length, 63mm free length, 5.7mm barrel nipple

Choke cable, only one barrel end. With adjuster

variable availability Availability varies on this part, check availability

02132810-z 02132810 GU02132810 02 13 28 10
0213 2810 0213.2810 02.13.28.10

£28.00

INC VAT

£23.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Intermediate Plate

CLA12300 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport ALL, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Breva 1200 (2v/cyl), Griso 850, Griso 1100, Norge 1200 (2v/cyl)

Steel intermediate clutch plate

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

12082300-z 12082300 GU12082300 12 08 23 00
1208 2300 1208.2300 12.08.23.00

£28.00

INC VAT

£23.33 EX VAT this is the price you will pay if you are ordering from outside the UK

HT Lead Set

ELA18134 Universal Part

Dimensions:
120cm x 7mm

Kit containing two replacement 60cm silicon HT leads, lead ends and 90Â° plug caps. The leads are suppied as a single double length lead so you can cut it into two leads of the exact required length. Includes crimp on lead ends for standard big twin 12v round coils

Suitable for most models with coils under the tank where the HT lead is not moulded into the ignition coil. We recommend checking what type of plug cap you have and measuring your existing cable run to check this part will fit

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£28.00

INC VAT

£23.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Big End Shell Standard

ENA30000 Fits 850/1000 ALL Models, V7 Special, 1100 Sport ALL, V11 Sport (1999-2001), Cali 1100 (1994-1997), Cali EV (1997-2001), Daytona (1991-1996), 850 GT, V7 Sport, S3, 750S

Con rod bearing shell

4 required per engine. Also known as Guzzi ref. 12062000, 12062005, 28062050 Hole pattern may vary from the original part

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

30062000 GU30062000 30 06 20 00
3006 2000 3006.2000 30.06.20.00

£28.00

INC VAT

£23.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 17 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33