Shop headings: New Spares | Used Spares | Accessories | Brands
Pin for front main bearing flange
Sorry, this part is no longer available.
12012200 GU12012200 12 01 22 00
1201 2200 1201.2200 12.01.22.00
Sorry this item is out of production
Metal eagle badge used on yoke and solenoid cover
This part is due back in stock soon, call 01484 841395 to reserve yours
01517700 GU01517700 01 51 77 00
0151 7700 0151.7700 01.51.77.00
£15.00
INC VAT
£12.50 EX VAT
Clutch thrust bearing complete, sits in recess in rear gearbox casing.
Not suitable for early 4 speed gearboxes unless modified as per chapter 9 of Guzziology. Also known as Guzzi ref. 2A000376
This part is due back in stock soon, call 01484 841395 to reserve yours
12087001-z 12087001 GU12087001 12 08 70 01
1208 7001 1208.7001 12.08.70.01
£14.90
INC VAT
£12.42 EX VAT
Pair of black knurled alloy bar ends, fixes via included bolt
Only for models with standard steel handlebars, not for aluminium handlebars
This part is available by special order, request a quote
£14.40
INC VAT
£12.00 EX VAT
1 litre of ENI 4T Racing fully synthetic 5W-40 oil for PI (hydraulic valve lifter models). This is the oil recommended by Guzzi for all PI models. This is latest generation synthetic oil which gives best protection for your engine, even at extreme temperatures. The special formulation ensures great thermal and shear stability
Eni i-Ride racing 5W-40 with its particular additivation is able to guarantee a good engine detergent,in particular it has characteristics that allow efficient control of the formation of deposits areas submitted to high temperature.
The adoption of an innovative formulation technology makes it possible to enhance the engine performance in all operating conditions.
The product effectively counteracts wear phenomena that may occur in engines submitted to higher stresses.
Surpasses API SL, JASO MA and MA2
Quantities required:
More than 5 in stock
£14.25
INC VAT
£11.88 EX VAT
1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely
Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT
1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely
Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.
Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name
More than 5 in stock
GU30530527
£14.00
INC VAT
£11.67 EX VAT
1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely
Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT
Rear crankcase oil seal or rear main oil seal.
Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch
More than 5 in stock
90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67
£14.00
INC VAT
£11.67 EX VAT
Output oil seal for drive box
This oil seal fits output side of bevel box
More than 5 in stock
90407085-z 90407085 GU90407085 90 40 70 85
9040 7085 9040.7085 90.40.70.85
£14.00
INC VAT
£11.67 EX VAT