Rubber indicator stem with triangular foot for indicators LIA28670 LIA28678 LIA29753 and LIA29752

Attaches to bike via 2 x M6 screws

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is sold out

Left hand 'lego' handlebar switchgear. Includes flash / horn switch, indicators and lights selector

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is no longer available.

 18738062 GU18738062 18 73 80 62
 1873 8062 1873.8062 18.73.80.62

Left hand handlebar switchgear, CEV / Domino type with integrated clutch lever clamp.
Horn, indicators, lights and pass functions

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.

We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit

 This part is due back in stock soon, call 01484 841395 to reserve yours

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes

 2 in stock

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

5 pin 12 volt relay suitable for starter indicator, flasher and horn applications

Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 46 in stock

 19732500 GU19732500 19 73 25 00
 1973 2500 1973.2500 19.73.25.00

Round CEV amber indicator lens

Mounts using two screws (not supplied). Also known as Guzzi ref. 39753771 and 14753750

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 31 in stock

 39753770 GU39753770 39 75 37 70
 3975 3770 3975.3770 39.75.37.70

Stainless steel M6 dome head nut, many applications

Many applications including indicator mounting and securing exhaust flanges on V7 models

 More than 5 in stock

 92787006 GU92787006 92 78 70 06
 9278 7006 9278.7006 92.78.70.06

Indicator mounting bracket

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 18 in stock

 14751355 GU14751355 14 75 13 55
 1475 1355 1475.1355 14.75.13.55