Page 24 of 31
Sort by Title    | Sort by Price     |
Fits Moto Guzzi 1000 SP, Le Mans 2, Convert, G5, Le Mans 1, T3, T4, 850T (Late Models), 750S, S3, V7 700, V7 Special (1969-1971), 850 GT  Thermometer Dipstick Short Screw In Type ENA30951 | £57.60 INC VAT£48.00 EX VAT  |  |  Short screw in polished alloy thermometer dipstick with O ring for models without a sump extension. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order

| Dimensions: 121mm from end to sealing o ring 17004951-z 17004951 GU17004951 17 00 49 51 1700 4951 1700.4951 17.00.49.51 | | |
|
Fits Moto Guzzi Breva 750, V7 Classic (2008-2012), V7 Racer (2010-2012), V7 Cafe, Nevada 750 (1998-2015), V7 Special (2012-), V7 Stone (2012-), V7 Racer (2012-), V9 ALL, V7 II ALL, V7 III ALL  Thermometer Dipstick Alloy Screw In Type ENA30071 | £57.60 INC VAT£48.00 EX VAT  |  |  Screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick |  | quantity add to basket
| Dimensions: 138mm from end to sealing o ring, 25mm thread 1 in stock | | |
|
Fits Moto Guzzi Cali 2, Cali 3, Cali 1100, Cali EV | Footboard LH or RH Stainless steel FRA18446 | £57.60 INC VAT£48.00 EX VAT  |  |  Stainless steel footboard in stainless steel, supplied without rubber Footboard rubber available as FRA18448. May require minor modification to fit Cali 2 and Cali 3. Also known as Guzzi ref. 29443401 |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order

| Dimensions: mounting points 280mm centres, 8mm mounting holes. Overall dimensions approx. 140mm x 310mm x 30mm 03443555 GU03443555 03 44 35 55 0344 3555 0344.3555 03.44.35.55 | | |
|
Fits Moto Guzzi 1100 Sport IE, Daytona RS, Centauro, V11 Sport, 1100 Sport Corsa, 1200 Sport, Breva 1100, Breva 1200, Griso ALL, Norge, Stelvio  Thermometer Dipstick Long Alloy Screw In Type (White Face) ENA30073 | £55.20 INC VAT£46.00 EX VAT  |  |  Long screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius. Will not fit later 8V models that have unthreaded dipstick Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order

| Dimensions: M20 x 1.5 200mm from end to sealing o ring 05004930 GU05004930 05 00 49 30 0500 4930 0500.4930 05.00.49.30 | | |
|
Fits Moto Guzzi SP II, Le Mans 3, Le Mans 1000, Cali 2, T5, Mille GT, Cali 3, Cali 1100, Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Spada 3, Strada 1000, 1000S, Quota ALL, Daytona 1000, 1100 Sport (carb)  Thermometer Dipstick Long Alloy Screw In Type ENA30070 | £55.20 INC VAT£46.00 EX VAT  |  |  Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick |  | quantity add to basket
| Dimensions: 160mm from end to sealing o ring, 20mm thread 1 in stock 28004950-z 28004950 GU28004950 28 00 49 50 2800 4950 2800.4950 28.00.49.50 | | |
|
Fits Moto Guzzi NTX 350, V35 II, V35 3, V35 Florida, V35C, V50C, V65 Florida, V65C, V65 GT  Thermometer Dipstick Alloy Screw In Type ENA30072 | £55.20 INC VAT£46.00 EX VAT  |  |  Screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick |  | This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us.

| | | |
|
Fits Moto Guzzi Daytona, Cali 1100 (1994-1997), Cali EV (1997-2005), V11 Sport, Cali Stone, Cali Jackal, Centauro, Quota ALL, 1100 Sport ALL,  Individual Performance Air Filter K & N SIA30362 | £53.60 INC VAT£44.67 EX VAT  | 
 |  K&N high performance air filter, fit to throttle body or inlet trumpet as part of performance tuning Best results will be obtained when combined with a Mistral crossover, silencers and Power Commander - High Air Flow with Excellent Filtration
- Designed to Increase Horsepower and Acceleration
- Washable and Reusable
- Will NOT Void Vehicle Warranty
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- K&N Million Mile Limited Warranty
- Emissions Legal
- Economical, a K&N Air Filter Will Last the Life of Your Bike
- Works with Original Equipment Manufacturer Vehicle Electronics
- Easy High Performance Add-on
- Environmentally Friendly
Two filters required per bike. |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order

| Dimensions: 58mm ID to fit throttle body or inlet trumpet | | |
|
Fits Moto Guzzi T3 Cali, Convert, G5 | Footboard With Rubber FRA18440 | £52.90 INC VAT£44.08 EX VAT  | 
 |  Black painted steel footboard supplied with separate rubber. Fasteners included. Please note that rubber is supplied unattached and ready for glueing. |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order

| Dimensions: Centres of mounting lugs approx 250mm apart. 305mm x 118mm x 35mm. 18443450 GU18443450 18 44 34 50 1844 3450 1844.3450 18.44.34.50 | | |
|
Universal Part: Dart Flyscreen Blade Midnight Tint FAA10009 | £52.40 INC VAT£43.67 EX VAT  |  |  Stylish cafe racer style fly screen blade without fixing brackets. Ideal for special builders able to fabricate their own brackets, or to replace damaged screens. 4 Rubber grommets included for holes in screen. Screen has a dark tint finish. See FAA10001 for version with fixing brackets. Darker than FAA10002 |  | Sorry this item is not currently available from our suppliers. We may have an alternative part or replacement, please call us on +44 (0) 1484 841395 or email us to find out more

| Dimensions: 275mm wide x 260mm tall | | |
|
Universal Part: Dart Flyscreen Blade Light Smoke FAA10002 | £52.40 INC VAT£43.67 EX VAT  |  |  Stylish cafe racer style fly screen blade without fixing brackets. Ideal for special builders able to fabricate their own brackets, or to replace damaged screens. 4 Rubber grommets included for holes in screen. Screen has a light smoke finish. See FAA10001 for version with fixing brackets. |  | quantity add to basket
| Dimensions: 275mm wide x 260mm tall 3 in stock | | |
| Page 24 of 31
|