Shop headings: New Spares | Used Spares | Accessories | Brands
A pair of K&N high performance offset air filters, fit to throttle body or inlet trumpet as part of performance tuning
Best results will be obtained when combined with a Mistral crossover and silencers
£110.00
INC VAT
£91.67 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range.
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part also known as a windage plate
£105.00
INC VAT
£87.50 EX VAT
Pair of triangular side panels with fixings to fit all Tonti frame models with slotted side panel lugs under the seat
This is a kit, the fixings need bending and glueing to the sidepanel before the side panels can be fitted. The panels are GRP, fitting instructions are provided in German
£100.80
INC VAT
£84.00 EX VAT
These clever spacers allow the fitting of the taper roller head bearings which are standard on later small twins in place of the often damaged and fiddly OE ball bearing races.The taper roller bearings last much longer and are easily replaced unlike the ball bearing races
This part consists of 2 x taper roller adapters, depending on the condition of your stem it may be necessary to shim the taper roller bearings. You will also need 2 x SUA92249 taper roller bearings and you may find that extra headlamp rubbers SUA39701 are required to take up the extra distance between the top and bottom yoke on the fork stanchions. See The Shed for instructions. Also see replacement head bearing set FRA61940
39515000 GU39515000 39 51 50 00
3951 5000 3951.5000 39.51.50.00
£99.20
INC VAT
£82.67 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate
1 in stock
£99.00
INC VAT
£82.50 EX VAT
Smarten up the rear of your Griso with this tail tidy kit with includes an LED tail light. Adjustable brackets allow you to set the angle of your numberplate whilst the relector bracket is easily removed if not required. Supplied with fitting instructions and assembly hardware
This fender eliminator is custom made in Italy, brackets are made from coated metal with a lightweight and robust plastic numberplate holder. Designed for the Griso but could be fitted to other recent Guzzi's if modified.
This is an excellent cosmetic upgrade to the rear of your bike which will improve its appearance.
1 in stock
£99.00
INC VAT
£82.50 EX VAT
Pair of black ABS handguards with fitting hardware, these protect clutch and brake levers from damage as well as providing some weather protection for your hands. Supplied as a pair with bar end weights, bar end plugs (only for Stelvio), fitting information, spacers, bolts and washers.
Guzzi part ref. 883253 + 883254
983157 MG983157
£97.00
INC VAT
£80.83 EX VAT
Set of billet aluminium head protectors to help protect your bike in the event of a fall or slide. Made in Mandello del Lario
These bolt through the rocker cover using the supplied bolts and spacers
1 in stock
£95.00
INC VAT
£79.17 EX VAT
Stylish headlamp guard for your V85 TT. Protects your headlamp and adds to that pukka off road look. Fitted in minutes
£95.00
INC VAT
£79.17 EX VAT
Polished chrome alternator cover for small twins with Guzzi eagle motif
A great way to brighten up the front of your engine. The stock black plastic spacer is required to fit this part to models with Ducati charging systems (i.e. Breva 750, late Nevadas, V7 Classic and Cafe), please call to order if your bike isn't already fitted with this part. Also known as Guzzi ref. 32001610 and 19001620. NB not for V50 II or V35 I which use ACA18650
1 in stock
27001636-z 27001636 GU27001636 27 00 16 36
2700 1636 2700.1636 27.00.16.36
£93.80
INC VAT
£78.17 EX VAT