| Page 33 of 33
Pair Performance Air Filters K & N SIA30363 Fits Moto Guzzi Bellagio, Cali Classic (2006-2007), Cali Vintage, Cali Aquila Nera    Dimensions:
50mm ID to fit throttle body or inlet trumpet A pair of K&N high performance offset air filters, fit to throttle body or inlet trumpet as part of performance tuning Best results will be obtained when combined with a Mistral crossover and silencers - High Air Flow with Excellent Filtration
- Designed to Increase Horsepower and Acceleration
- Washable and Reusable
- Will NOT Void Vehicle Warranty
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- K&N Million Mile Limited Warranty
- Emissions Legal
- Economical, a K&N Air Filter Will Last the Life of Your Bike
- Works with Original Equipment Manufacturer Vehicle Electronics
- Easy High Performance Add-on
- Environmentally Friendly
Two filters required per bike. £60.00 INC VAT £50.00 EX VAT This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us Please call or enquire to check availability of this part Dipstick Long Alloy Screw In Type ENA30020 Fits Moto Guzzi 1000 SP, SP II, Cali 2, T5, Cali 3, Spada 3  Dimensions:
107mm gasket surface to high mark Long screw in polished alloy dipstick with O ring for models with fairing lowers (dipstick protrudes through fairing to make oil level checking much simpler and more accurate) Use this longer dipstick for models fitted with a sump extension, note that the dipstick extension is 80mm long which is shorter than the original part. Supplied with both O rings £59.50 INC VAT £49.58 EX VAT This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Footboard LH or RH Stainless steel FRA18446 Fits Moto Guzzi Cali 2, Cali 3, Cali 1100, Cali EV  Dimensions:
mounting points 280mm centres, 8mm mounting holes. Overall dimensions approx. 140mm x 310mm x 30mm Stainless steel footboard in stainless steel, supplied without rubber Footboard rubber available as FRA18448. May require minor modification to fit Cali 2 and Cali 3. Also known as Guzzi ref. 29443401 03443555 GU03443555 03 44 35 55
0344 3555 0344.3555 03.44.35.55 £57.60 INC VAT £48.00 EX VAT This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Thermometer Dipstick Short Screw In Type ENA30951 Fits Moto Guzzi 1000 SP, Le Mans 2, Convert, G5, Le Mans 1, T3, T4, 850T (Late Models), 750S, S3, V7 700, V7 Special (1969-1971), 850 GT  Dimensions:
121mm from end to sealing o ring Short screw in polished alloy thermometer dipstick with O ring for models without a sump extension. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick 17004951-z 17004951 GU17004951 17 00 49 51
1700 4951 1700.4951 17.00.49.51 £57.60 INC VAT £48.00 EX VAT This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Thermometer Dipstick Alloy Screw In Type ENA30071 Fits Moto Guzzi Breva 750, V7 Classic (2008-2012), V7 Racer (2010-2012), V7 Cafe, Nevada 750 (1998-2015), V7 Special (2012-), V7 Stone (2012-), V7 Racer (2012-), V9 ALL, V7 II ALL, V7 III ALL Dimensions:
138mm from end to sealing o ring, 25mm thread Screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick £57.60 INC VAT £48.00 EX VAT This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us Please call or enquire to check availability of this part Motobatt Smart Battery Charger ACA96000 Universal Part Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside
6V / 12V 1A Auto-sensing charger.
Suits all AGM, Lead Acid, Calcium and Gel batteries
Charges 6v and 12v batteries
Ring terminal and alligator clip harnesses included
Spark proof
Maintains full charge
Simple, connect and wait for green light
Overload / Short circuit protection 1 in stock £57.00 INC VAT £47.50 EX VAT Thermometer Dipstick Long Alloy Screw In Type ENA30070 Fits Moto Guzzi SP II, Le Mans 3, Le Mans 1000, Cali 2, T5, Mille GT, Cali 3, Cali 1100, Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Spada 3, Strada 1000, 1000S, Quota ALL, Daytona 1000, 1100 Sport (carb) Dimensions:
160mm from end to sealing o ring, 20mm thread Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick 1 in stock 28004950-z 28004950 GU28004950 28 00 49 50
2800 4950 2800.4950 28.00.49.50 £55.20 INC VAT £46.00 EX VAT Thermometer Dipstick Alloy Screw In Type ENA30072 Fits Moto Guzzi NTX 350, V35 II, V35 3, V35 Florida, V35C, V50C, V65 Florida, V65C, V65 GT Screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick £55.20 INC VAT £46.00 EX VAT This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us Please call or enquire to check availability of this part Thermometer Dipstick Long Alloy Screw In Type (White Face) ENA30073 Fits Moto Guzzi 1100 Sport IE, Daytona RS, Centauro, V11 Sport, 1100 Sport Corsa, 1200 Sport, Breva 1100, Breva 1200, Griso ALL, Norge, Stelvio Dimensions:
M20 x 1.5 200mm from end to sealing o ring Long screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius. Will not fit later 8V models that have unthreaded dipstick Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick 05004930 GU05004930 05 00 49 30
0500 4930 0500.4930 05.00.49.30 £55.20 INC VAT £46.00 EX VAT This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Front Spindle Slider Set ACA85176 Fits Moto Guzzi V85TT Set of front axle crash bobbins made of abrasion-resistant plastic to help protect your bike in the event of a fall or slide. The smooth surface provides excellent sliding properties. The polished bull logo in red adds a visual highlight to your motorcycle. See this link for fitting instructions. £54.00 INC VAT £45.00 EX VAT This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part |
Secure online shopping 
