Rear hugger finished in gloss black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets

Supplied with brackets and fasteners. See here for fitting instructions. Fitment of this hugger requires some mechanical skill- if in doubt please entrust this job to a professional

Big bore downpipes made in high strength stainless steel complete with crossover.

Lighter than stock downpipes with improved gasflow
Hand made to order in Italy
Also available in black

 This part is available by special order, request a quote

Low plastic front mudguard. This Matte Black guard element is manufactured from textured ABS to match your OEM bodywork. Includes two comprehensive brackets manufactured from DX51D+Z275MAC galvanized steel & powder-coated in satin black. Designed specifically for the V85 TT to provide a caliper mounted mudguard for the front wheel without the need to remove your colour coded fork guards. A very subtle and effective way to protect your engine casings, exhaust headers and lower bodywork.

This will help protect the exhaust pipes and front engine cover on your V85TT from road debris, salt, water and traffic grime thrown up by your front wheel

Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression. This kit with Italian made piston and rings is an an alternative to Gilardoni kits which can often be in short supply.

Components for one cylinder. See ENA18102 for similar kit made by Gilardoni

 This part is available by special order, request a quote

18060102-z 18060102 GU18060102 18 06 01 02
 1806 0102 1806.0102 18.06.01.02

Dimensions:
88mm bore

Big bore headers made from high quality satin finish stainless steel. CNC exhaust flanges and gaskets included. Solves the corrosion problem of the original header pipes, these are also significantly lighter than the originals.

• Made from AISI304 stainless steel for EURO4 compliant models.
• Compatible with original crossover, heat shields and lambda sensors.
• Exhaust header gaskets included
• Manufactured on the shores of Lake Como and developed using a rolling road for optimum gas flow.
  
   Order now and we will post your order within 28 days.
  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps

 This part is available by special order, request a quote

 30146400 GU30146400 30 14 64 00
 3014 6400 3014.6400 30.14.64.00

Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simpifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. The kit consists of:

1. Deep sump casting (82mm deep) with all oil ways. Uses oil filter SIA14530
   Replaces sump extension ENA14002. Finished in black this is a great upgrade for your Guzzi

   Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black to special order

    This part is available by special order, request a quote

   Dimensions:
   82mm thick

   [ CLOSE WINDOW ]
   [ CLOSE WINDOW ]

SW Motech fitting kit for fog light set ACA85213. These bike-specific mounts provide optimal positioning of the EVO lights, because they are developed exclusively for each motorcycle model. The sturdy elements made of powder-coated steel are screwed on to existing attachment points. They guarantee secure hold for the EVO lights, even when riding off-road. Please refer to the mounting instructions to determine if headlamps can be mounted standing, hanging and/or sideways on your motorcycle model.

Compatible with SW-MOTECH lights
Simple mounting on available attachment points
Bike-specific development ensures that lights fit perfectly
Corrosion protection thanks to the high-quality powder coating

 This part is available by special order, request a quote

SW Motech auxiliary light set. These Evo fog lights increase your better visibility in bad weather conditions. Evo lights represent outstanding design, high-quality standards and reliable water and dust protection (IP69). The long life LED technology guarantees trouble-free and maintenance free operation for years.; trouble-free and maintenance-free operation through wear-free LED, consuming significantly less power

• input voltage: 12 V DC
• LED: 12 W (per light)
• luminous flux: 1, 050 lm
• ECE test mark: ECE R19 F3
• broad dispersion
• outer diameter: 7.1 cm
• Water and dust proof (IP69)
• connects directly to the motorcycle, no changes to your main look necessary
• weatherproof, illuminated green handlebar switch

See ACA85223 for fitting kit

 This part is available by special order, request a quote

Rear hugger finished in matte black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets

Similar matte finish to front mudguard MUA00244 .
Supplied with brackets and fasteners. See here for fitting instructions. Fitment of this hugger requires some mechanical skill- if in doubt please entrust this job to a professional