Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper

Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.

 17652360 GU17652360 17 65 23 60
 1765 2360 1765.2360 17.65.23.60

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Dimensions:
108mm mounting centres

Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear

Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 18652201 GU18652201 18 65 22 01
 1865 2201 1865.2201 18.65.22.01

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Dimensions:
108mm mounting centres

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Dimensions:
58mm OD

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Dimensions:
58mm OD

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs.
No longer available - superceded by BRA14901

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338.

See BRA14102 for alternative aluminium cap

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

 98052475 GU98052475 98 05 24 75
 9805 2475 9805.2475 98.05.24.75

Dimensions:
M8 x 75mm

Copper crush washer for brakeline connections, fits standard banjo bolt

Two M10 washers required per banjo bolt. Interchangeable with SIA10900

 25656100 GU25656100 25 65 61 00
 2565 6100 2565.6100 25.65.61.00

Rubber bleed nipple cap with retaining ring

Suitable only for M8 and M10 bleed nipples

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

 This part is available by special order, request a quote

 18257551 GU18257551 18 25 75 51
 1825 7551 1825.7551 18.25.75.51

Dimensions:
M6 threads, 8mm ID hole