Shop headings: New Spares | Used Spares | Accessories | Brands
Replacement piston seals and spring for Grimeca front master cylinder
See BRA28278 for a complete replacement master cylinder
Sorry, this part is no longer available.
30659330 GU30659330 30 65 93 30
3065 9330 3065.9330 30.65.93.30
Dimensions:
Solid piston 13mm OD x 38mm
Sorry this item is out of production
One piece front brake disc disc
Always fit new brake pads when replacing a brake disc - BRA45446
Sorry, this part is no longer available.
30613325 GU30613325 30 61 33 25
3061 3325 3061.3325 30.61.33.25
Dimensions:
296mm OD
Sorry this item is out of production
Brembo anti-rattle spring kit for Brembo rear caliper, holds rear pads in place
Sorry, this part is no longer available.
05659030 GU05659030 05 65 90 30
0565 9030 0565.9030 05.65.90.30
Sorry this item is out of production
Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs
Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338
Sorry, this part is no longer available.
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR
Dimensions:
58mm OD
Sorry this item is out of production
Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
This part is due back in stock soon, call 01484 841395 to reserve yours
If you would like to be emailed once this item is available again then click here
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
Dimensions:
Seals for 38mm pistons
£18.00
INC VAT
£15.00 EX VAT
Cover rubber for PS 13 and PS 16 brake master cylinder lever
Brembo ref. 110353040
This part is available by special order, request a quote
27663615 GU27663615 27 66 36 15
2766 3615 2766.3615 27.66.36.15
£10.40
INC VAT
£8.67 EX VAT
Brakelight switch banjo bolt
See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050 See BRA39801 for a rubber for this switch
This part is due back in stock soon, call 01484 841395 to reserve yours
If you would like to be emailed once this item is available again then click here
14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59
Dimensions:
M10 x 1 x 17mm bolt, 18mm from end to underside of bolt head
£21.00
INC VAT
£17.50 EX VAT
Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts
Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850
This part is due back in stock soon, call 01484 841395 to reserve yours
If you would like to be emailed once this item is available again then click here
10279850 GU10279850 10 27 98 50
1027 9850 1027.9850 10.27.98.50
Dimensions:
12mm pivot OD
£7.80
INC VAT
£6.50 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT