Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.
The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT
Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
5kg lighter that stock silencers
Increased power
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers.You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
1 in stock
£750.00
INC VAT
£625.00 EX VAT
High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT
This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.
Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.
See installation instructions here.
Order now and we will post your order within 7 days.
£149.00
INC VAT
£124.17 EX VAT
Front wheel bearing, sealed
2 bearings required per wheel, Also used as rear wheel bearing on V7 850
5 in stock
92204221 GU92204221 92 20 42 21
9220 4221 9220.4221 92.20.42.21
£10.80
INC VAT
£9.00 EX VAT
Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems
These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt
More than 5 in stock
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
Kit of 4 black frame caps to tidy up the bolt heads for the pillion and exhaust footpeg hanger
Simple installation, lasting looks
This part is due back in stock soon, call 01484 841395 to reserve yours
£15.00
INC VAT
£12.50 EX VAT
Kit of 8 frame and footpeg caps to finish off your V100. The kit, made of plastic material resistant to UV rays and heat, was developed specifically for the Moto Guzzi V100. It consists of 6 footrest caps and 2 frame caps, covering both the right and left sides. The frame caps are finished with a Moto Guzzi eagle emblem in keeping with the branding elsewhere on the V100. These frame caps tidy the side profile of your machine and prevent water and road spray getting into the frame.
Note that the included M10 washer is required to space the gear lever so it is clear of the installed plugs. Scan the QR code on the box for a short video guide to installation.
1 in stock
£26.00
INC VAT
£21.67 EX VAT
Speedo reset knob for odometer
No longer available
Availability varies on this part, check availability
19762810 GU19762810 19 76 28 10
1976 2810 1976.2810 19.76.28.10
£9.30
INC VAT
£7.75 EX VAT
High performance Quadflex maintenance free AGM Motobatt 12 volt 19Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. Motobatt absorbed gel matting batteries feature the latest absorbent glass mat technology. This offers increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly
Suitable as a replacement for Guzzi ref. 03704571. If fitted to CARC models the top battery securing bracket will need to be omitted or modified as this battery has a different profile to the OE Yuasa battery.
Supplied charged and ready to fit, Motobatt Quadflex batteries produce 20% more cranking power (250 CCA) and are spill proof. This battery is physically smaller than the original battery fitted to some V35, V50 and V65 models, it may require packing out in the battery compartment.
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.
Can also be used to replace Odyssey PC925L where a bike is in regular use (this battery should be installed on its side).
One year warranty on all our Motobatt batteries
Also available at the same price in black by special order - call 01484 841395 to order
Please note this part CANNOT be posted outside of the UK mainland area
This part is due back in stock soon, call 01484 841395 to reserve yours
883818 MG883818
£98.00
INC VAT
£81.67 EX VAT