Pair of triangular side panels with fixings to fit all Tonti frame models with slotted side panel lugs under the seat

This is a kit, the fixings need bending and glueing to the sidepanel before the side panels can be fitted. The panels are GRP, fitting instructions are provided in German

 This part is available by special order, request a quote

Hyperpro lower spring for rear shock. The black spring lowers the rear end of bike by 25mm to help you feel more comfortable on the bike. The front forks can also be dropped through the yokes to make the fitment of this spring a handling neutral change.

For the complete package see SUA85004 for a lowering kit for the forks

 This part is available by special order, request a quote

Set of billet aluminium head protectors to help protect your bike in the event of a fall or slide. Made in Mandello del Lario

These bolt through the rocker cover using the supplied bolts and spacers

 This part is available by special order, request a quote

Chromed luggage rack incorporating seat hinge bracket. Bolts to upper shock absorber mounts

Also suitable for use on T3, T4 and Spada in conjunction with T3 Cali seat SEA18651

 Sorry, this part is no longer available.

17466570-z 17466570 GU17466570 17 46 65 70
 1746 6570 1746.6570 17.46.65.70

Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.

 Sorry, this part is no longer available.

A pair of K&N high performance offset air filters, fit to throttle body or inlet trumpet as part of performance tuning

Best results will be obtained when combined with a Mistral crossover and silencers

• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• Washable and Reusable
• Will NOT Void Vehicle Warranty
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions
• K&N Million Mile Limited Warranty
• Emissions Legal
• Economical, a K&N Air Filter Will Last the Life of Your Bike
• Works with Original Equipment Manufacturer Vehicle Electronics
• Easy High Performance Add-on
• Environmentally Friendly

 This part is due back in stock soon, call 01484 841395 to reserve yours

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range.

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part also known as a windage plate

 This part is available by special order, request a quote

Top Box Luggage Rack. High quality Italian made aluminium luggage rack designed to mount on top of the factory top box. All necessary fixings are included. Finished in black with cutouts for fixing bungees or strap

Perfect for increasing carrying capacity by strapping lightweight items (e.g. sleeping gear or clothing) to your top box. For maximum capacity combine with ACA00090 pannier top racks.

 This part is available by special order, request a quote