Page 22 of 31
Sort by Title    | Sort by Price |
Fits Moto Guzzi V7 Special (2012-), V7 Stone (2012-), Nevada 750 (2012-2013), V7 Racer (2012-), V9 ALL, V7 II ALL, V7 III ALL 
Performance Air Filter K & N
SIA10434 | £63.00 INC VAT£52.50 EX VAT |  | K&N high performance air filter, flat paper cartridge type - High Air Flow with Excellent Filtration
- Designed to Increase Horsepower and Acceleration
- Washable and Reusable
- Will NOT Void Vehicle Warranty
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- K&N Million Mile Limited Warranty®
- Emissions Legal
- Economical, a K&N Air Filter Will Last the Life of Your Bike
- Works with Original Equipment Manufacturer Vehicle Electronics
- Easy High Performance Add-on
- Environmentally Friendly
|  | This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us.
| Dimensions: 180mm x 125mm x 38mm AP8104924 | | |
|
Fits Moto Guzzi G5, Convert, Cali 2, Cali 3, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT, Spada ALL, T3, T4, T5, V7 Sport
Performance Ignition Coil 12 volt Dyna Dual Output Pair
ELA14505 | £167.00 INC VAT£139.17 EX VAT |  | Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using Dyna ignition ELA20119 with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 90mm and 100mm mounting centres 1471650 | | |
|
Fits Moto Guzzi V35 II (Late Models), Imola, V50 3, Monza, V65 ALL, G5, Convert, Cali 2, Cali 3, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT, 1000 SP, SP II, Spada 3, 850T, T3, T4, T5, V7 Sport
Performance Ignition Coil 12 volt Dyna Single Output Pair
ELA14101 | £167.00 INC VAT£139.17 EX VAT |  | Pair of performance Dyna 12 volt 5 ohm single lead ignition coils with angled HT lead socket. These are a cooler running coil that offer improved starting and performance Dyna Performance Replacment Coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount.
Individual coils available by special order, call us for details. See ELA00001 for crimp on HT lead connector | | This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us.
| Dimensions: 90mm and 100mm mounting centres 1471650 | | |
|
Fits Moto Guzzi 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV
Pillion Footpeg Tarozzi
ACA11636 | £37.50 INC VAT£31.25 EX VAT |  | Lightweight folding Tarozzi aluminium pillion footrest on zinc finish steel bracket footpeg. Footpeg is hollow with rubber Sleeve. Supplied with nyloc nut and washer. A great way to tidy up the pillion footrests on your project bike | | quantityadd to basket
| Dimensions: M10 x 35mm mounting bolt, peg is 110mm x 29mm diameter 2 in stock 01163620 GU01163620 01 16 36 20
0116 3620 0116.3620 01.16.36.20 | | |
|
Fits Moto Guzzi 1000 SP, Convert, G5 | Piston and Barrel Kit 88mm Gilardoni
ENA18102 | £309.70 INC VAT£258.08 EX VAT |  | Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression Components for one cylinder | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 88mm bore 18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02 | | |
|
Fits Moto Guzzi T3, T4 | Piston and Barrel Kit 88mm Gilardoni Upgrade
ENA18103 | £309.70 INC VAT£258.08 EX VAT | | Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression. This is a 950cc upgrade for 850cc models Components for one cylinder. The barrel is designed to fit the standard crankcase aperture on 850cc bikes so it is not necessary to modify the crankcase | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 88mm bore 18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02 | | |
|
Fits Moto Guzzi T3, T4, G5, Convert, 850T, V7 Sport, S3, Le Mans 1, Le Mans 2
Polished Rocker Cover Set Round Barrel
ENA14235 | £257.30 INC VAT£214.42 EX VAT | 
 | Set of highly polished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project This rocker cover set also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310 | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| 17023560 GU17023560 17 02 35 60
1702 3560 1702.3560 17.02.35.60 | | |
|
Fits Moto Guzzi V50 3, V65 ALL, NTX 350, V35 Florida, Imola 2, Nevada 350, V50C, 750 Targa, Strada 750, NTX 750, Nevada 750 (carb models)
Polished Short Alloy Bellmouth Intake
ACA12003 | £37.80 INC VAT£31.50 EX VAT | 
 | Short alloy bellmouth / trumpet intake with domed mesh for Dellorto PHBH 30 carb, replacing air filter Supplied with fixing clip, carb shown is for illustration purposes | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one week of your order
| Dimensions: 43mm ID x 44mm long | | |
|
Page 22 of 31
|
Secure online shopping with SagePay 
