Gutsibits Guzzi spares
go to Gutsibits home pagego to about us pagesgo to the Shop got to Help Pages
  0 items
 Menu
The Shop

New Parts

Used Spares

Accessories

Guzzi Gifts

Mistral Exhausts
Our phone lines are closed, please  order online from our Shop


Show approximate prices

Our customers say...

official UK distributors of Mistral performance exhaust systems

authorised distributors of ENI Motorcycle oil products

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop   New Spares  All Models  Accessories
Sort by Title
Sort by Price
Page 6 of 33
1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  
Clip On Handlebars Tommaselli
HAA11032 Fits Moto Guzzi V50 I, V50 II, V50 3, V35 I, V35 II, Imola, Monza 
click to view full size

Dimensions:
For 32mm stanchions, 223mm usable handlebar

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder fitted to small twins unless the master cylinder is modified. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

£152.20

INC VAT

£126.83  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Clip On Handlebars Tommaselli
HAA11135 Fits Moto Guzzi V7 Sport, 750S, Le Mans 1, Le Mans 2, Le Mans 3, V65, V35C,V50C, V65C, Lario, Monza 2, Imola 2, 850T, T3, T4, G5, Convert, 1000 SP, S3, Cali 2, Mille GT (Series 1) 
click to view full size

Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

£152.20

INC VAT

£126.83  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Clip On Handlebars Tommaselli
HAA11140 Fits Moto Guzzi Spada 3, Cali 3, Le Mans 1000, Mille GT (1990-1993), V7 ALL, V7 II ALL 
click to view full size

Dimensions:
For 40mm stanchions, 223mm usable handlebar

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder unless the master cylinder is modified. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

£152.20

INC VAT

£126.83  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Clip On Handlebars Tommaselli
HAA11138 Fits Moto Guzzi V35 GT, V65 GT, V65 Florida, V75 4 Valve, Nevada 350 (1994-1999), Nevada 750 (1991-2001), 750 Targa, Strada 750, 750T, SP II, T5 
click to view full size

Dimensions:
For 38mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

£152.20

INC VAT

£126.83  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Clock Surround Kit Polished Aluminium Drilled Mount with Ignition Switch Hole
ACA01001 Fits Moto Guzzi T3, T4, Le Mans 2, G5, Convert, 1000 SP, SP II, 850T 
click to view full sizeclick to view full size

Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

  • Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
  • 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
  • Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
  • Polished aluminium instrument backs (attach with existing nuts)

Bolts to handlebar clamps, see ACA01002 for this part without drillings for the handlebar clamps

Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes

5 in stock

£160.00

INC VAT

£133.33  EX VAT

Clock Surround Kit Polished Aluminium Plain Mount with Ignition Switch Hole
ACA01002 Universal Part
click to view full sizeclick to view full size

Dimensions:
6mm thick aluminium, 48mm deep instruments with 60mm stud centres

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

  • Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
  • 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
  • Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
  • Polished aluminium instrument backs (attach with existing nuts)

Supplied ready for you to drill your own mounting holes to suit your project, see ACA01001 if you would prefer a ready to mount kit for T3, Le Mans 2 etc...

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

2 in stock

£160.00

INC VAT

£133.33  EX VAT

Custom Lightbar With Spotlights
ACA08002 Fits Moto Guzzi Cali EV, Cali Jackal, Cali Stone, Cali Classic, Cali Special 
click to view full sizeclick to view full size

Dimensions:
450mm overall width, 120mm spotlights

German made chrome lightbar and heavy duty stainless steel spotlights. Single beam spotlights supplied with brackets, bulbs, sheathing, fuses and lead wires. A large central bracket mounts to a existing holes in your lower yoke and positions the lightbar far enough forward to fit this lightbar in conjunction with a screen

Fits all models, with or without screen

£235.00

INC VAT

£195.83  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Custom Lightbar With Spotlights
ACA40551 Fits Moto Guzzi Nevada 750 (2010-2016) 
click to view full size

German made chrome lightbar and heavy duty stainless steel spotlights. Single beam spotlights supplied with brackets, bulbs, sheathing, fuses and lead wires. A large central bracket mounts to a existing holes in your lower yoke and positions the lightbar far enough forward to fit this lightbar in conjunction with a screen

£219.50

INC VAT

£182.92  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Dart Classic Flyscreen Blade Dark Tint
FAA10012 Universal Part
click to view full size

Dimensions:
275mm wide x 260mm tall

Stylish cafe racer style dark tinted fly screen blade without fixing brackets. Ideal for special builders able to fabricate their own brackets, or to replace damaged screens. 4 Rubber grommets included for holes in screen.

Screen has a dark tint finish. See FAA10001 for version with fixing brackets.

1 in stock

£52.40

INC VAT

£43.67  EX VAT

Dart Classic Flyscreen Blade Grey
FAA10004 Universal Part
click to view full sizeclick to view full size

Dimensions:
275mm wide x 260mm tall

Stylish cafe racer style opaque fly screen without fixing brackets. Produced in grey ABS this screen blade is suitable for painting to match your bike's colour scheme. This screen blade is ideal for special builders able to fabricate their own brackets. 4 Rubber grommets included for holes in screen.

We can supply these with fixing bracket, see FAA10021

£49.00

INC VAT

£40.83  EX VAT

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
Please call or enquire to check availability of this part
Page 6 of 33
1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33