Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

1 in stock

Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simpifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. The kit consists of:

1. Deep sump casting (82mm deep) with all oil ways
2. Oil filter (SIA14530 type)
3. Sump gasket
4. Sump bolt kit with washers
   Oil filter removal tool
5. Sump plug and washer

Replaces sump extension ENA14002. Finished in silver this is a great upgrade for your Guzzi

Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black to special order

1 in stock

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Small round left hand bar end mirror finished in black. Knuckle allows adjustment of mirror. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Perfect for achieving that minimal look on your bike

1 in stock

Smarten up the rear of your Griso with this tail tidy kit with includes an LED tail light. Adjustable brackets allow you to set the angle of your numberplate whilst the relector bracket is easily removed if not required. Supplied with fitting instructions and assembly hardware

This fender eliminator is custom made in Italy, brackets are made from coated metal with a lightweight and robust plastic numberplate holder. Designed for the Griso but could be fitted to other recent Guzzi's if modified.

This is an excellent cosmetic upgrade to the rear of your bike which will improve its appearance.

1 in stock

Black right hand knee protector, mounts to head and includes rubber pad and washers

See FRA18941 for replacement rubbers for this knee guard

1 in stock

Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in black finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!

1 in stock

Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.

Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection

1 in stock

Larger screen or windshield which improves weather protection. 60% larger than the standard screen and made from anti-scratch ultra resistant polycarbonate for longevity

Wider and slighty taller than ACA85327

1 in stock

Medium sized screen which improves weather protection and shelter from wind blast.
Made from 4mm clear anti-scratch ultra resistant polycarbonate for longevity

This screen is manufactured in Italy and developed for the V85 TT, includes screen adjuster fittings. Mounts to the same fitting points as the original screen. Flatter in profile and smaller than ACA85326

1 in stock

The V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

1 in stock