Set of clutch plates

Consists of 1 x single sided friction plate, 7 x dual sided friction plates, 7 x intermediate plates

 This part is available by special order, request a quote

Single sprung seat. This is an Italian made reproduction of the original Nuovo Falcone Militare seat. Built on a sturdy plastic base with chromed springs and white 'Moto Guzzi' text on the rear of the seat

 This part is available by special order, request a quote

 10460500 GU10460500 10 46 05 00
 1046 0500 1046.0500 10.46.05.00

Black 40 litre Junior top box / top case to to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. This case will take a single helmet

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

These are a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This will latch to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.

• 550D Polyester construction with PVC coating
• 2mm thick synthetic leather (PU) detailing
• 190D Nylon inner lining material
• 14 litre capacity for each bag
• Product complies with Reach regulations
• Roll-top closure system
• Saddlebag straps with hook and loop fastening closure
• Front handle
• Waterproof removable inner lining with thermo-sealed seams
• Strap with ring loop to fasten to double D-ring
• Front waterproof zip
• KAPPA RAMBLER logo printed on patch
• Bags come with a TNT bag with the KAPPA RAMBLER logo for storage

 Order now and we will post your order within 7 days.

Motobatt quadflex 30Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. This powerful battery produces a massive 390 cranking amps, and is rated at 32 ah.

These sealed absorbed glass matt batteries have been used in military and off road applications for many years.
They offer increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.
Supplied fully charged and ready to fit.

NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.

This is a better value replacement for the Odyssey PC925 battery. Replaces Guzzi refs. 14704550, 18704550, 28704550, 28704545, 28704551, 28704552, 14704551, 14704500 and 14704505

One year warranty on all our Motobatt batteries.

Slightly taller than original loop frame battery so you may need to make some modification to retaining bracket

Please note this part CANNOT be posted outside of the UK mainland area

 1 in stock

03704540-z 03704540 GU03704540 03 70 45 40
 0370 4540 0370.4540 03.70.45.40

Fork bush kit containing all necessary bushes and seals for the overhaul of a pair of Nuovo Falcone forks

 This part is available by special order, request a quote

 12525800 GU12525800 12 52 58 00
 1252 5800 1252.5800 12.52.58.00

Chrome exhaust downpipe

 This part is available by special order, request a quote

 10120800 GU10120800 10 12 08 00
 1012 0800 1012.0800 10.12.08.00

Replacement sealed beam unit / reflector and glass with sidelight bulb and bulb rubber. Euro spec

See ELA17740 for retaining clips

 This part is available by special order, request a quote

 10740411 GU10740411 10 74 04 11
 1074 0411 1074.0411 10.74.04.11