Gutsibits Guzzi spares
» Login | Register

your cartMy Cart
(0 items = £0.00)
tweet this!facebook this!bookmark on delicious go to Gutsibits home pagego to about us pagesgo to the Shop got to Help Pages
visit our shop and order online using our secure server
New Moto Guzzi Parts

Used Parts

accessories for your Moto Guzzi

Guzzi Gifts for every taste

Performance lubricants for your motorcycle


Please call, our phone lines are open.



Show approximate prices in:

Our customers say...



--> authorised distributors of ENI Motorcycle oil products

 

Shop headings: New Spares | Used Spares | Accessories

The Shop  >> Used Spares >> Nuovo Falcone >> Cafe Racer
This section contains special parts for your Cafe Racer project, these parts may not be standard to your bike but with skill and patience can be adapted for stunning results
Page 1 of 2
«  1  2  »  
Sort by Title  Sort by Price 
Fits Moto Guzzi S3, T3, 1000 SP, Nuovo Falcone, T4, Convert, G5, V7 Sport, 750S, 850T, Cali 2 
Air Filter S & B
SIA00055
£19.80 INC VAT
£16.50  EX VAT
click to view full size
click to view full size
S&B air filter. Large circular K & N type air filter with chromed back, includes clip. Designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits square bodied VHB 30 carbs.

Either ENA14700 or ENA14157 can be used as a breather box to replace the unit in the airbox. See SIA00095 if you require a longer narrower filter with the same ID. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

Availability on this part varies. If you would like to be emailed once this item is available again then email us or call us on 01484 841395

Dimensions: 55mm front to back, 90mm diameter on chromed back, 42mm ID for carb mounting

Universal Part: Cafe Racer Seat Unit
CFA00051
£104.80 INC VAT
£87.33  EX VAT
click to view full size
click to view full size
Classically styled humped race seat unit with built in number plate hanger and recess for tail light ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications

Mounting brackets and seat cushion not included

quantityadd to basket

Dimensions: 225mm width, 640mm long (excluding plate hanger), 650mm hump

1 in stock

Universal Part: Cafe Racer Seat Unit
CFA00050
£104.80 INC VAT
£87.33  EX VAT
click to view full sizeClassically styled humped race seat unit ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications

Mounting brackets and seat cushion not included

This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us.

Dimensions: 220mm width, 685mm long, 245mm wide x 130mm hump

Universal Part: Clock Surround Kit Polished Aluminium Plain Mount with Ignition Switch Hole
ACA01002
£160.00 INC VAT
£133.33  EX VAT
click to view full size
click to view full size
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
  • Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
  • 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
  • Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
  • Polished aluminium instrument backs (attach with existing nuts)

Supplied ready for you to drill your own mounting holes to suit your project, see ACA01001 if you would prefer a ready to mount kit for T3, Le Mans 2 etc...

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order

Dimensions: 6mm thick aluminium, 48mm deep instruments with 60mm stud centres

Universal Part: Imola Style Half Fairing
CFA00075
£100.40 INC VAT
£83.67  EX VAT
click to view full sizeStylish fibreglass Imola fairing ideal for your home built Guzzi cafe racer. Supplied unpainted and undrilled. Brackets and screen not included.

Designed to work with 750SS / 900SS screen

quantityadd to basket

Dimensions: 700mm length, 430mm wide, height 400mm

1 in stock

079703958

Also fits Ducati 750/900 SS & SSD
Universal Part: Imola Style Half Fairing Screen
CFA00076
£48.00 INC VAT
£40.00  EX VAT
click to view full sizeTinted screen for replica fairing CFA00075. Supplied without fittings

quantityadd to basket

1 in stock

079703958

Also fits Ducati 750/900 SS & SSD (1972-1977)
Universal Part: LED Flasher Unit Round
ELA17521
£8.30 INC VAT
£6.92  EX VAT
click to view full sizeRound 12v two pin flasher relay for LED indicators. For use with aftermarket LED indicators

Includes rubber for attaching to bike.

NB Only suitable for LED indicators. Will not work in modern V7 models because these do not utilise a flasher unit.

quantityadd to basket

Dimensions: 32mm diameter

2 in stock

Universal Part: Mirror Black Bar End Small Round LH
HAA00014
£30.90 INC VAT
£25.75  EX VAT
click to view full size
click to view full size
Small round left hand bar end mirror finished in black. Knuckle allows adjustment of mirror. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Perfect for achieving that minimal look on your bike

quantityadd to basket

Dimensions: 82mm diameter head

1 in stock

Universal Part: Mirror Chrome Bar End Large Round
HAA00013
£30.90 INC VAT
£25.75  EX VAT
click to view full size
click to view full size
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included

quantityadd to basket

Dimensions: 125mm diameter head

2 in stock

Universal Part: Mirror LSL Black Bar End
HAA00112
£60.90 INC VAT
£50.75  EX VAT
click to view full size
click to view full size
Clamp on bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors

Ideal for models like the V7 Racer where bar ends are fitted. This elegant LSL Clubman mirror fits all 22mm and 1" bars. Fits left or right. Blue tinted glass to reduce glare

Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted

Perfect for that classic cafe racer look

quantityadd to basket

Dimensions: 88mm diameter head, 136mm stem

1 in stock

Page 1 of 2
«  1  2  »