Shop headings: New Spares | Used Spares | Accessories | Brands
Replacement pannier to frame lock for all Hepco and Becker panniers. This is the lock at the rear of the panniers that secures it to the pannier frame plate
Supplied with key, barrel, lock plate, rivets and fitting instructions. Includes pannier frame plate LUA70114
1 in stock
£39.60
INC VAT
£33.00 EX VAT
Replacement top box to rear luggage rack lock for Hepco and Becker Junior top boxes / top cases. This is the lock at the base of the top box which attaches it to the luggage rack
Supplied with key, rivets, lock plate and fitting instructions
1 in stock
£37.00
INC VAT
£30.83 EX VAT
Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.
This clutch upgrade has the following advanges over the old two plate clutch:
1 in stock
£495.00
INC VAT
£412.50 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£190.00
INC VAT
£158.33 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate
1 in stock
£99.00
INC VAT
£82.50 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Lightweight M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins). An aluminium filler plug made in Italy.
1 in stock
12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00
£26.00
INC VAT
£21.67 EX VAT
This handlebar riser kit moves the handlebars up by 35mm resulting in much improved comfort. Finished in black, this is a high quality Italian engineered kit. For yokes with 32-35mm clamp bolt centres
Kit contains fitting instructions, zinc finish bolts, bolt head plugs and risers. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit
1 in stock
£45.00
INC VAT
£37.50 EX VAT
Pair of black tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
This part is due back in stock soon, call 01484 841395 to reserve yours
£44.00
INC VAT
£36.67 EX VAT
Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
This part is due back in stock soon, call 01484 841395 to reserve yours
£53.00
INC VAT
£44.17 EX VAT