The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Quota Brakes

Sort by Title

Sort by Price

Page 5 of 6

1 2 3 4 5 6

Pivot Pin and Nut Clutch or Brake Lever

HAA10850 Fits 1100 Sport ALL, Cali 3, Cali 1100, Cali EV, Centauro, Daytona, V11 Sport, Spada 3, Nevada ALL, Quota 1100

Dimensions:
12mm pivot OD

Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts

Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

10279850 GU10279850 10 27 98 50
1027 9850 1027.9850 10.27.98.50

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Disc Front

BRA30613 Fits Quota 1000

Dimensions:
280mm OD, 5mm thick

One piece front brake disc disc

Always fit new brake pads when replacing a brake disc - BRA11498

This part is available by special order, request a quote

30613331 GU30613331 30 61 33 31
3061 3331 3061.3331 30.61.33.31

£175.00

INC VAT

£145.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Aluminium Master Cylinder Cap PS15 Brembo

BRA14102 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750, 850T, V7 Sport, 750S, S3

Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal

Make your Guzzi stand out from the crowd!

This part is available by special order, request a quote

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Pad Pin Kit

BRA05130 Fits Norge, Stelvio, Griso, Bellagio, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Quota 1100

Dimensions:
Pin 58mm long

Pad pin kit for rear brake caliper. Consists of pad pin plus split pin

Also known as Guzzi ref. 978606

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

05659130 GU05659130 05 65 91 30
0565 9130 0565.9130 05.65.91.30

£15.50

INC VAT

£12.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Aluminium Master Cylinder Cap PS12 Brembo

BRA14103 Fits S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 Valves Per Cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (Frame Nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio

Dimensions:
53mm OD

Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models

Make your Guzzi stand out from the crowd!

This part is available by special order, request a quote

10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Master Cylinder Rear PS13C

BRA30030 Fits Quota 1100, 750X, Breva 750

Dimensions:
40mm spacing between mountings

Rear brake master cylinder PS 13C, foot operated.

Supercedes Guzzi ref. AP8113502. Guzzi recommend this part as the replacement for the PS12B master cylinder 27667015 fitted to the Quota 1000 and NTX models. Note that the mounting bracket on the Quota will need an additional hold drilling to fit this master cylinder (different mounting centres). NTX models will need a new bracket fabricating. See BRA28659 for overhaul kit

This part is available by special order, request a quote

30667030 GU30667030 30 66 70 30
3066 7030 3066.7030 30.66.70.30

£94.00

INC VAT

£78.33 EX VAT this is the price you will pay if you are ordering from outside the UK

P2 F09 Brake Caliper Brembo Replica Front LH / Rear

BRA18060 Fits 850/1000 ALL Models, Cali 1100 (1994-1998)

Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

This part is available by special order, request a quote

£145.00

INC VAT

£120.83 EX VAT this is the price you will pay if you are ordering from outside the UK

P2 F09 Brake Caliper Brembo Replica Front RH

BRA20330 Fits 850/1000 ALL Models, Cali 1100 (1994-1998)

Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

This part is available by special order, request a quote

£145.00

INC VAT

£120.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Overhaul Kit Brembo

BRA02723 Fits Quota 1100, Cali EV, Cali Bassa, Cali Jackal

Rebuild kit for Brembo PF2.3032 calipers fitted at front on Quota 1100 and rear on Cali models. Contains seals, brake grease, washers, bleed screw and dust cap. One kit required per caliper.

Caliper seal kit

This part is available by special order, request a quote

£26.00

INC VAT

£21.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Gear or Brake Linkage Block

GEA18551 Fits V35 ALL, V50 ALL, V65 ALL, Nevada 750 ALL, Strada 750, 750 Targa, 750 SP, V7 Stone, V7 Special, V7 Racer, V7 II ALL, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
M6 threads, 8mm ID hole

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

This part is available by special order, request a quote

18257551 GU18257551 18 25 75 51
1825 7551 1825.7551 18.25.75.51

£63.00

INC VAT

£52.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 5 of 6

1 2 3 4 5 6