Shop headings: New Spares | Used Spares | Accessories | Brands
S&B air filter. Offset mounting, chromed back, includes clip. Fits Dellorto PHF36 and PHF30 carbs.
This K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter. Either ENA14700 or ENA14157 can be used as a breather box to replace the unit in the airbox on round barrel models
More than 5 in stock
£21.00
INC VAT
£17.50 EX VAT
Fibreglass triangular V7 Sport style side panel. Supplied unpainted, undrilled and without fixings. Ideal for the home special builder
Designed for early Tonti frames but may fit other models after appropriate modifications have been made. Two panels required per bike
More than 5 in stock
£32.00
INC VAT
£26.67 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate
2 in stock
£99.00
INC VAT
£82.50 EX VAT
Special Inlet rubber with HT lead guide for late Dellorto PHM carbs with a inlet stub OD of 46mm
Use clip SSA45970
This part will only fit late PHM40 carbs with 46mm inlet stubs, we recommend measuring your carbs before ordering
2 in stock
£35.00
INC VAT
£29.17 EX VAT
Dimensions:
195mm diameter, M8 threaded mounting holes, approx 195mm between mounting holes. 13.5cm front to back, 7cm from mounting holes to rear of bowl
Complete shallow bowl 190mm chrome headlight unit. Includes a pilot / parking light. A shallow bowl makes it especially suitable for mounting on Moto Guzzis underneath the instruments
Homologated for road use.
Supplied complete with H4 bulb, pilot light and four short wires (without connectors). This headlight will fit fairing cowling FAA99575 for Le Mans 1 conversions if trim strip is not fitted to inside edge of fairing. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems
2 in stock
£88.00
INC VAT
£73.33 EX VAT
Rubber sleeved folding riders footpeg, suitable for Tarozzi rearsets and as an upgrade for standard footrests
Folding footrest
1 in stock
£40.00
INC VAT
£33.33 EX VAT
Chrome plug or bolt cover for M8 socket head bolts, tidies up screw heads
1 in stock
23943410 GU23943410 23 94 34 10
2394 3410 2394.3410 23.94.34.10
£4.20
INC VAT
£3.50 EX VAT
Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.
This clutch upgrade has the following advanges over the old two plate clutch:
1 in stock
£495.00
INC VAT
£412.50 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Lightweight folding Tarozzi aluminium pillion footrest on zinc finish steel bracket footpeg. Footpeg is hollow with rubber Sleeve. Supplied with nyloc nut and washer.
A great way to tidy up the pillion footrests on your project bike
Availability varies on this part, check availability
01163620 GU01163620 01 16 36 20
0116 3620 0116.3620 01.16.36.20
£39.90
INC VAT
£33.25 EX VAT