Shop headings: New Spares | Used Spares | Accessories | Brands
Clamp on Pipercross foam air filter
This K & N foam air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits VHB 24 and VHB 26 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter. Supercedes discontinued S & B air filters
2 in stock
£24.00
INC VAT
£20.00 EX VAT
Dimensions:
195mm diameter, M8 threaded mounting holes, approx 195mm between mounting holes. 13.5cm front to back, 7cm from mounting holes to rear of bowl
Complete shallow bowl 190mm chrome headlight unit. Includes a pilot / parking light. A shallow bowl makes it especially suitable for mounting on Moto Guzzis underneath the instruments
Homologated for road use.
Supplied complete with H4 bulb, pilot light and four short wires (without connectors). This headlight will fit fairing cowling FAA99575 for Le Mans 1 conversions if trim strip is not fitted to inside edge of fairing. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems
2 in stock
£88.00
INC VAT
£73.33 EX VAT
Chrome plug or bolt cover for M8 socket head bolts, tidies up screw heads
1 in stock
23943410 GU23943410 23 94 34 10
2394 3410 2394.3410 23.94.34.10
£4.20
INC VAT
£3.50 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle and height, pull back angle is adjusted on the fork stanchion clamp. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar
Availability varies on this part, check availability
£170.00
INC VAT
£141.67 EX VAT
S&B air filter. Chromed back, includes clip
This K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits PHBH 30, PHBH 28 and VHB 30 Dellorto carbs. See SIA00055 if you require a shorter but larger diameter filter. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter
This part is due back in stock soon, call 01484 841395 to reserve yours
£21.00
INC VAT
£17.50 EX VAT
Dimensions:
35mm internal diameter x 70mm tall collar, approx. 105mm reach from stanchion to headlight bolt
Pair of Tommaselli chromed headlight brackets with anti vibration rubber collars and silver finish aluminium brackets. To fit 35mm and 36mm diameter forks.
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.
This part is available by special order, request a quote
£118.00
INC VAT
£98.33 EX VAT
Complete round 203mm left hand dip (UK spec) headlight unit with bulb. Black body with chrome rim.
Due to the scarcity of LH dip Italian made headlights we have sourced this reasonably priced alternative which is similar in size to the headlamp used on V50 and T3 models. Supplied complete with headlight bulb. Headlamp is slightly larger than stock so some repositioning of the headlamp brackets may be required. Please note there is no pilot light with this headlamp and thread size for bolt fixing holes is M8. This is a smaller thread than the M10 thread on T3 indicator stems.
This part is available by special order, request a quote
£77.20
INC VAT
£64.33 EX VAT
Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal
Make your Guzzi stand out from the crowd!
This part is available by special order, request a quote
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR
£32.50
INC VAT
£27.08 EX VAT