Shop headings: New Spares | Used Spares | Accessories | Brands
Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.
1 in stock
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£125.00
INC VAT
£104.17 EX VAT
Polished Brembo aluminium clutch lever
Also known as Guzzi ref. 981046
This part is available by special order, request a quote
AP8118659
£125.00
INC VAT
£104.17 EX VAT
Output flange for drive box, engages with the driveplate on the wheel
Also known as Guzzi ref. 17351401. 8 hole M8 fixing in flange
This part is available by special order, request a quote
17351400 GU17351400 17 35 14 00
1735 1400 1735.1400 17.35.14.00
£125.00
INC VAT
£104.17 EX VAT
Set of 3 piston rings for Nikasil 92mm bore
Only for Cali 1100 frame prefixes KC and KD, for KG and KH prefixes see ENA18601
This part is available by special order, request a quote
30060660-z 30060660 GU30060660 30 06 06 60
3006 0660 3006.0660 30.06.06.60
£123.50
INC VAT
£102.92 EX VAT
UK spec Bosch headlamp glass for 180mm headlight, supplied with seal and marked for left hand dip pattern
This part is available by special order, request a quote
29740400 GU29740400 29 74 04 00
2974 0400 2974.0400 29.74.04.00
£120.00
INC VAT
£100.00 EX VAT
Pair of Hagon progressive fork springs
These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out. Supplied with instructions, see OIA02010 and OIA02005 for fork oil
This part is available by special order, request a quote
03526600-z 03526600 GU03526600 03 52 66 00
0352 6600 0352.6600 03.52.66.00
£120.00
INC VAT
£100.00 EX VAT
Timing sensor for ignition and tacho
3 pin block connector. Used on models with the smaller 15M ECU
2 in stock
01721600 GU01721600 01 72 16 00
0172 1600 0172.1600 01.72.16.00
£115.00
INC VAT
£95.83 EX VAT
Lambda sensor. Wiring harness may be shorter that your existing connector on some modeels, and will therefore need extending.
This part is available by special order, request a quote
32727010 GU32727010 32 72 70 10
3272 7010 3272.7010 32.72.70.10
£115.00
INC VAT
£95.83 EX VAT
Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.
The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT
Pillion footpeg left hand side.
Used as rider footrest on Nevada.
1 in stock
23441310 GU23441310 23 44 13 10
2344 1310 2344.1310 23.44.13.10
£111.60
INC VAT
£93.00 EX VAT