The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Cali EV Cali Jackal Cali Stone Specia All Categories

Sort by Title

Sort by Price

Page 5 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
This part is due back in stock soon, call 01484 841395 to reserve yours
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
This part is due back in stock soon, call 01484 841395 to reserve yours
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M8 Bleed Nipple

BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone

Dimensions:
M8 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.
This part is due back in stock soon, call 01484 841395 to reserve yours
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Autosol Metal Polish 75ml Tube

SIA30003 Universal Part

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

part in stock 1 in stock

£6.50

INC VAT

£5.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Ball Bearing

GEA92417 Fits G5, 1100 Sport ALL, Cali 2, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, V7 Sport, 750S, S3, T3, T4, T5, Mille GT, Quota ALL, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Daytona, Centauro

Dimensions:
47mm OD

Ball bearing for gearbox mainshaft

Rear bearing for selector shaft

part in stock 1 in stock

92201417-z 92201417 GU92201417 92 20 14 17
9220 1417 9220.1417 92.20.14.17

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Ball Bearing

TRA92070 Fits 850/1000 ALL Models, Breva 750, Nevada 750, Nevada 350, Cali 1100 (1994-1997), Cali EV, Quota 1100, V35, V50, V65, 850 GT, V7 Classic, V7 Sport, Daytona (1991-1996), Centauro

Dimensions:
110mm OD

Ball bearing for drive box output side

part in stock 1 in stock

92201070 GU92201070 92 20 10 70
9220 1070 9220.1070 92.20.10.70

£50.70

INC VAT

£42.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Balljoint Gear Linkage

GEA29550 Fits 1100 Sport ALL, Centauro, Daytona, 850/1000 ALL Models, Nevada 350, Nevada 750 (1991-2001), Quota ALL, NTX 650, 750X, Cali EV (1997-2003), Cali 1100

Dimensions:
M6 threads

Ball joint or rose joint for gear change linkage. M6 threads to fix to clevis pin and gearbox lever

Also known as 18258101, 32258110 and 29258150. Can be used in place of AP8110053.

Not suitable for upper gear linkage on series 2 Cali 1100 - we can source a part for this application - please call.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

28258160 GU28258160 28 25 81 60
2825 8160 2825.8160 28.25.81.60

£17.50

INC VAT

£14.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Bolt Kit M10 With Bleed Nipple

BRA01006 Universal Part

Dimensions:
M10 x 1

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

part in stock More than 5 in stock

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Brake Light Switch Fine Thread

ELA14959 Fits 1100 Sport ALL, Centauro, Daytona (1991-1996), V11 Sport, V35 I, V35 II, V35 3, V35 Florida, V35C, V50 I, V50 II, V50C, V50 3, Monza, V65, V65 Florida, V65 GT, Lario, Quota ALL, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, SP II, Spada 3, S3, T3, T4, T5, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Strada 1000, Nevada 750 (1991-2003)

Dimensions:
M10 x 1 x 17mm bolt, 18mm from end to underside of bolt head

Brakelight switch banjo bolt

See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Bar End Black Alloy Pair

HAA32861 Universal Part

Dimensions:
16.5mm OD in handlebars, 20mm x 26mm OD end

Pair of black knurled alloy bar ends, fixes via included bolt

Only for models with standard steel handlebars, not for aluminium handlebars

This part is available by special order, request a quote

£14.40

INC VAT

£12.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 5 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33