Shop headings: New Spares | Used Spares | Accessories | Brands
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT 
Dimensions:
M20 x 1.5
M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins), also used for cylinder head bolt
See ACA12600 for aluminium alternative that can be undone by hand. Includes recess for O ring ENA90203
More than 5 in stock
12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00
£17.50
INC VAT
£14.58 EX VAT
Dimensions:
M8 x 105mm
Stainless retaining bolt for oil filter cover
Stainless socket cap
This part is due back in stock soon, call 01484 841395 to reserve yours
27152885 GU27152885 27 15 28 85
2715 2885 2715.2885 27.15.28.85
£3.00
INC VAT
£2.50 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
5 in stock
£8.20
INC VAT
£6.83 EX VAT
Dimensions:
10mm threaded shank, 8mm across flats
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
Dimensions:
6mm threaded shank, 8mm across flats
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
Dimensions:
M8 x 1.25 standard thread, 10mm threaded shank, 16mm from tip to underside of flats
A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models
Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230
4 in stock
01659230 GU01659230 01 65 92 30
0165 9230 0165.9230 01.65.92.30
£6.10
INC VAT
£5.08 EX VAT
Dimensions:
M6 x 16mm
A2 stainless socket cap button head screw M6 x 16mm
More than 5 in stock
£0.80
INC VAT
£0.67 EX VAT
Dimensions:
M6 x 18mm
Stainless steel exhaust stud nut, this is a less expensive alternative to the genuine nut
More than 5 in stock
31121880-z 31121880 GU31121880 31 12 18 80
3112 1880 3112.1880 31.12.18.80
£1.40
INC VAT
£1.17 EX VAT
Secure online shopping 
