1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

Taper needle roller bearing used as steering head bearing

2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake

 More than 5 in stock

 92249225 GU92249225 92 24 92 25
 9224 9225 9224.9225 92.24.92.25

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18601

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

23526470-z 23526470 GU23526470 23 52 64 70
 2352 6470 2352.6470 23.52.64.70

Fork Brace O Ring

 More than 5 in stock

 90706092 GU90706092 90 70 60 92
 9070 6092 9070.6092 90.70.60.92

Upper fork bush

Split fork bush, also known as Guzzi ref. 30525861. No longer available.

 Sorry, this part is no longer available.

 599629 MG599629

Upper fork bush

Split fork bush, also known as Guzzi ref. 30526761

 Availability varies on this part, check availability

 599505 MG599505

Dust cover for fork seals

Suitable for V11 models with 40mm Marzocchi forks, also known as Piaggio ref. 599502, 00H00202231, AP8123201, AP8123296, AP8123777
See SUA01535 for 43mm version.

 2 in stock

 01530571 GU01530571 01 53 05 71
 0153 0571 0153.0571 01.53.05.71

Also fits Aprilia RS 125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio X9 500 Evolution (2006-2007)

Dust cover for fork slider

 Sorry, this part is no longer available.

31524550-z 31524550 GU31524550 31 52 45 50
 3152 4550 3152.4550 31.52.45.50