Gutsibits Guzzi spares
go to Gutsibits home pagego to about us pagesgo to the Shop got to Help Pages
  0 items
 Menu
The Shop

New Parts

Used Spares

Accessories

Guzzi Gifts

Mistral Exhausts
Our phone lines are closed, please  order online from our Shop

Show approximate prices

Our customers say...

official UK distributors of Mistral performance exhaust systems

authorised distributors of ENI Motorcycle oil products

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop      New Spares  All Models  Exhausts

This section contains silencers, downpipes, H pipes, exhaust flanges and exhaust clamps

Sort by Title
Sort by Price
Page 1 of 31
1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  
BoosterPlug Fuelling Fixer
FUA05001 Fits V7 Classic (2009-2011), V7 Cafe (2009-2011), V7 Stone (2009-2011), V7 Special (2009-2011) 
click to view full sizeclick to view full size

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems on twin throttle body V7 mark 1 models.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

  • Improved and gentler throttle action when opening and closing throttle
  • Richer mixture when opening the throttle improves acceleration
  • Removes the uneven low speed running that is typical for modern lean burn engines
  • Stronger and more consistent at idle.
  • Reduced backfiring with aftermarket exhausts on engine braking
  • Improved fuel economy
  • Lifetime warranty View more information or download installation instructions. This Booster plug is just for mark 1 V7 models with twin throttle bodies, unfortunately it cannot be fitted to 2012 on single throttle body models.

    this part is due back in stock soon This part is due back in stock soon, call 01484 841395 to reserve yours

  • £129.00

    INC VAT

    £107.50  EX VAT

    BoosterPlug Fuelling Fixer Euro 4
    FUA85011 Fits V85TT (EURO4) 
    click to view full sizeclick to view full size

    The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
    Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

    The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
    Make your bike run as it should have done from the factory!

    • Improved and gentler throttle action when opening and closing throttle
    • Richer mixture when opening the throttle improves acceleration
    • Booster plug removes the uneven low speed running that is typical for modern lean burn engines
    • Stronger and more consistent at idle.
    • Reduced backfiring with aftermarket exhausts on engine braking
    • Improved fuel economy
  • Lifetime warranty View more information or download installation instructions. Not suitable for EURO5 bikes - see FUA85002 for these models

    this part is available by special order This part is available by special order, request a quote

  • £129.00

    INC VAT

    £107.50  EX VAT

    BoosterPlug Fuelling Fixer
    FUA85014 Fits Cali 1400 ALL, MGX-21 
    click to view full sizeclick to view full size

    The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
    Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

    The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
    Make your bike run as it should have done from the factory!

    • Improved and gentler throttle action when opening and closing throttle
    • Richer mixture when opening the throttle improves acceleration
    • Booster plug removes the uneven low speed running that is typical for modern lean burn engines
    • Stronger and more consistent at idle.
    • Reduced backfiring with aftermarket exhausts on engine braking
    • Improved fuel economy
  • Lifetime warranty View more information or download installation instructions.

    this part is due back in stock soon This part is due back in stock soon, call 01484 841395 to reserve yours

  • £129.00

    INC VAT

    £107.50  EX VAT

    Exhaust Stud Kit Titanium
    SSA85048 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/Cyl), Griso 1200 (4v/Cyl), Norge 1200 (4v/Cyl), Stelvio 
    click to view full sizeclick to view full size

    Dimensions:
    M8 x 48mm studs

    Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

    The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

    part in stock More than 5 in stock

    1A003632R

    £22.00

    INC VAT

    £18.33  EX VAT


    M8 Nut Stainless Steel Dome Head
    SSA08003 Universal Part
    click to view full size

    Stainless steel M8 dome head nut, used for exhaust studs, gearbox and drive box studs

    Many applications including gearbox, exhaust and bevel box mounts on big twins, V7 850, V85TT and V100. Also used on small twins for bevel box mount bolts. Also known as Guzzi ref. 860651

    part in stock More than 5 in stock

    £1.40

    INC VAT

    £1.17  EX VAT


    Gasket Exhaust Manifold
    ENA29022 Fits Breva 750, Nevada ALL, V65 ALL, V7 Classic, V7 Racer, V7 Cafe, V75 4 valve, V7 II ALL 
    click to view full size

    Dimensions:
    28mm internal diameter x 40.8mm outer dimeter x 3mm

    Exhaust gasket. Please note that these may need to be trimmed down slightly to fit a V35 / V50. See ENA22040 for alternative

    Also known as Guzzi ref. 61025280 19025280. ENA22040 can be used in place of this gasket

    part in stock More than 5 in stock

     61025200 GU61025200 61 02 52 00
     6102 5200 6102.5200 61.02.52.00

    £2.00

    INC VAT

    £1.67  EX VAT


    Lafranconi Silencer O Ring
    EXA14997 Fits Le Mans 1, Le Mans 2 
    click to view full size

    O ring seal for balance pipe to silencer, fits into recess in silencer spigot

    Two seals required for a balance pipe

    part in stock More than 5 in stock

    £3.40

    INC VAT

    £2.83  EX VAT


    Wavy M6 Washer
    ENA03380 Universal Part
    click to view full size

    Dimensions:
    M6 x 12mm

    M6 wavy washer

    Also known as Guzzi ref. 95129115

    part in stock More than 5 in stock

     03013800 GU03013800 03 01 38 00
     0301 3800 0301.3800 03.01.38.00

    £0.90

    INC VAT

    £0.75  EX VAT


    Collar Nut Exhaust Flange
    ENA31881 Fits V35 ALL, V50 ALL, V65 ALL, Breva 750, Nevada 750 ALL, V7 Classic, V7 Racer, V7 Stone, V7 Special, V7 Cafe, V7 II ALL 
    click to view full sizeclick to view full size

    Dimensions:
    M6 x 18mm

    Stainless steel exhaust stud nut, this is a less expensive alternative to the genuine nut

    part in stock More than 5 in stock

    31121880-z 31121880 GU31121880 31 12 18 80
     3112 1880 3112.1880 31.12.18.80

    £1.40

    INC VAT

    £1.17  EX VAT


    Exhaust Manifold Gasket
    ENA90718 Fits 850/1000 ALL Models, 1100 Sport ALL, 1200 Sport (2v/cyl), Bellagio, Breva 850, Breva 1100, Breva 1200 (2v/cyl), Cali 1100, Cali EV, Cali Stone, Cali Jackal, Griso 850, Griso 1100, Quota ALL, V11 Sport ALL 
    click to view full size

    Dimensions:
    47.7mm outer diameter x 38.4mm x 2.7mm

    Exhaust gasket

    Header gasket may be supplied in copper or aluminium

    part in stock More than 5 in stock

     90718370 GU90718370 90 71 83 70
     9071 8370 9071.8370 90.71.83.70

    £2.75

    INC VAT

    £2.29  EX VAT


    Page 1 of 31
    1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31