The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares 1100 Sport V11 Tools

Sort by Title

Sort by Price

Page 1 of 2

1 2

Workshop Tank Protector

SIA00001 Universal Part

Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£18.00

INC VAT

£15.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Workshop Stand

TOA00717 Fits V11 Sport

Clever stand which makes working on your bike much easier! This stand clamps safely to the bolts just underneath the rider footrests, and allows you to lift the bike securely in a similar action to a centrestand.

Useful substitute for a centre stand.

Needs 2 x 18mm 0.5 inch drive sockets to fit a V11 (not supplied)

This part is available by special order, request a quote

979717 MG979717

£140.00

INC VAT

£116.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Timing Sprocket Nut Tool (Bosch and Saprisa models)

TOA18651 Fits 850/1000 ALL Models, V7 Sport, 850 GT, V7 Sport, V11 Sport

Tool for crankshaft timing sprocket nut, this is a superior design tool intended for repeated use. Use for clutch centre nut on V11 Sport. Will not reach timing sprocket nut on models with Ducati charging system.

Also fits swingarm spindle nut on Stelvio.

Half inch socket drive

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

18927651 GU18927651 18 92 76 51
1892 7651 1892.7651 18.92.76.51

£41.00

INC VAT

£34.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Spark Plug Spanner

TOA00114 Fits V35 (ALL 2 valve), V50 (ALL 2 valve), V65 (ALL 2 valve), V75 (ALL 2 valve), Strada 750, 750T, 750 Targa, 750 SP, 750X, Nevada ALL, V7 Classic, Breva 750, V7 Racer (2011), V7 Cafe, 850/1000 ALL Models, Cali Stone, Cali Jackal, Breva 1100, Breva 1200 (2 Valves Per Cylinder), Cali 1100 (1994-1997), Cali EV, Norge 1200 (2v/cyl), Griso 1100, 1100 Sport, Quota 1100, V11 Sport, 1200 Sport (2v/cyl), Bellagio

Long reach spark plug spanner for all two valves per cylinder twins. This plug spanner fits the large spark plug on twin plugged models, see TOA05931 for a spanner for the small long life PMR8B spark plug

part in stock 2 in stock

£9.90

INC VAT

£8.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Spark Plug Spanner

TOA00014 Fits V35 (ALL 2 valve), V50 (ALL 2 valve), V65 (ALL 2 valve), V75 (ALL 2 valve), Strada 750, 750T, 750 Targa, 750 SP, 750X, Nevada ALL, V7 Classic, Breva 750, V7 Racer (2011), V7 Cafe, 850/1000 ALL Models, Cali Stone, Cali Jackal, Breva 1100, Breva 1200 (2 Valves Per Cylinder), Cali 1100 (1994-1997), Cali EV, Norge 1200 (2v/cyl), Griso 1100, Griso 12 (2008-2015), 1100 Sport, Quota 1100, V11 Sport, 1200 Sport (2v/cyl), Bellagio

Spark plug spanner for all two valves per cylinder twins. This plug spanner fits the large spark plug on twin plugged models, see TOA05931 for a spanner for the small long life PMR8B spark plug

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Piston Ring Compressor Tool

TOA23201 Universal Part

Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings

For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models

This part is available by special order, request a quote

£48.00

INC VAT

£40.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Output Shaft Tool

TOA14400 Fits V7 Sport, 750S, S3, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, V7 Classic, V7 Sport, 850 GT, Quota 1100, Daytona, Centauro

Dimensions:
27mm across flats x 24mm deep

Box spanner for gearbox output shaft nut

This part is available by special order, request a quote

14905400 GU14905400 14 90 54 00
1490 5400 1490.5400 14.90.54.00

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Filter Tool 8 Sides

TOA41006 Fits Moto Guzzi 125 2C, 250 TS, S3, 850/1000 ALL Models, Daytona 1000, Cali 1100 (1994-1997), 1100 Sport Carb, Cali EV, Cali Jackal, Cali Stone, Cali Vintage, Quota ALL

Dimensions:
81mm OD

8 sided oil filter tool for new UFI filters

This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters

part in stock 2 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Filter Tool 14 Sides

TOA41005 Fits Cali 1100 (1994-1997), 1100 Sport Carb, Cali EV, Cali Jackal, Cali Stone, Cali Vintage, Quota ALL, Cali 1400 Custom, MGX-21, Audace, Griso 1200 (2015-2018), Norge 1200 (2015-2016), Stelvio (2015-2018)

Dimensions:
81mm OD

14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.

This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters

part in stock 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Filter Removal Tool 8 Sides

TOA01201 Fits Breva 850, Breva 1100, Breva 1200, Norge 1200 (2006-2015), Griso 1100, Griso 1200 (2008-2015), 1200 Sport, Stelvio (2008-2015), 1100 Sport IE, Daytona RS, Centauro, V11 Sport ALL

Dimensions:
82mm OD 8 flats

8 sided oil filter tool for removing oil filter SIA15300 from the sump. For models with an oil filter cover in the base of the sump (V11 Sport etc), the reverse side of the tool also allows you to remove the cover meaning you do not have to drop the complete sump to perform a filter change. Also works with newer CARC models which do not have an oil filter cover

This part is available by special order, request a quote

01929100-z 01929100 GU01929100 01 92 91 00
0192 9100 0192.9100 01.92.91.00

£65.00

INC VAT

£54.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 1 of 2

1 2