Sump bolt kit containing all replacement stainless steel socket cap bolts for your sump cover

For Cali EV models check whether you have a sump extension fitted, the earlier models withh sump extension use SSA80007. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models with billet rocker cover protectors fitted as these models need 8 of the bolts to be longer

Sump bolt kit containing all replacement stainless steel socket cap bolts for models without a sump extension fitted

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

Grey Moto Guzzi sticker featuring the Guzzi eagle. Perfect for mudguards, tanks, screens and anywhere else that will take a sticker.

Grey oval sticker with black border. Ideal for covering up marks on bodywork!

Dimensions:
62mm x 28mm

Replacement blue LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

Dimensions:
8mm body OD, 29mm overall

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and extends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

Dimensions:
1.8mm thickness

Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

Dimensions:
8mm body OD, 29mm overall

Aluminium pannier adapter plate, this bolts to the pannier rail or frame for the pannier to lock to

May be supplied in silver or black finish. These are normally included with panniers

Dimensions:
31mm x 61mm