Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains everything brake related from pads to banjo bolts and discs
Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606
This part is available by special order, request a quote
30660125 GU30660125 30 66 01 25
3066 0125 3066.0125 30.66.01.25
£225.00
INC VAT
£187.50 EX VAT
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
Dimensions:
108mm mounting centres
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
If you would like to be emailed once this item is available again then click here
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
Dimensions:
108mm mounting centres
£220.00
INC VAT
£183.33 EX VAT
One piece front brake disc disc
Always fit new brake pads when replacing a brake disc - BRA45446
Sorry, this part is no longer available.
30613325 GU30613325 30 61 33 25
3061 3325 3061.3325 30.61.33.25
Dimensions:
296mm OD
Sorry this item is out of production
Brembo PS 13 handlebar mounted front master cylinder. The PS13 has a small rectangular fluid reservoir
Replaces Guzzi refs 28660178 and 30660180. Supplied complete with black or polished lever. Uses switch ELA30860
This part is due back in stock soon, call 01484 841395 to reserve yours
If you would like to be emailed once this item is available again then click here
28660278 GU28660278 28 66 02 78
2866 0278 2866.0278 28.66.02.78
£185.00
INC VAT
£154.17 EX VAT
One piece front brake disc disc
Always fit new brake pads when replacing a brake disc - BRA11498
This part is available by special order, request a quote
30613331 GU30613331 30 61 33 31
3061 3331 3061.3331 30.61.33.31
Dimensions:
280mm OD, 5mm thick
£175.00
INC VAT
£145.83 EX VAT
Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
One piece rear disc.
Note that this brake disc has 12mm ID mounting holes, you may require bushes if using 8mm bolts. Also known as Guzzi ref. 37635705, 30635731. Always fit new brake pads when replacing a brake disc - BRA27611 or BRA11498
This part is available by special order, request a quote
30635701 GU30635701 30 63 57 01
3063 5701 3063.5701 30.63.57.01
Dimensions:
260mm OD
£138.00
INC VAT
£115.00 EX VAT
Rear brake master cylinder PS 13C, foot operated.
Supercedes Guzzi ref. AP8113502. Guzzi recommend this part as the replacement for the PS12B master cylinder 27667015 fitted to the Quota 1000 and NTX models. Note that the mounting bracket on the Quota will need an additional hold drilling to fit this master cylinder (different mounting centres). NTX models will need a new bracket fabricating. See BRA28659 for overhaul kit
This part is available by special order, request a quote
30667030 GU30667030 30 66 70 30
3066 7030 3066.7030 30.66.70.30
Dimensions:
40mm spacing between mountings
£96.00
INC VAT
£80.00 EX VAT