Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper

Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 17652360 GU17652360 17 65 23 60
 1765 2360 1765.2360 17.65.23.60

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Brembo PS 13 handlebar mounted front master cylinder. The PS13 has a small rectangular fluid reservoir

Replaces Guzzi refs 28660178 and 30660180. Supplied complete with black or polished lever. Uses switch ELA30860

 This part is due back in stock soon, call 01484 841395 to reserve yours

 28660278 GU28660278 28 66 02 78
 2866 0278 2866.0278 28.66.02.78

Adjustable front black brake lever for PS 11, PS 13 and PS 16 rectangular master cylinder.

Also known as Guzzi ref. 28605678. See BRA01630 or BRA01640 for a span adjustable alternative and HAA10850 for lever pivot pin

 This part is due back in stock soon, call 01484 841395 to reserve yours

10270640-z 10270640 GU10270640 10 27 06 40
 1027 0640 1027.0640 10.27.06.40

Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')

Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606

 This part is available by special order, request a quote

 30660125 GU30660125 30 66 01 25
 3066 0125 3066.0125 30.66.01.25

Lower front brakeline

 Sorry, this part is no longer available.

 31658865 GU31658865 31 65 88 65
 3165 8865 3165.8865 31.65.88.65

One piece rear disc.

Note that this brake disc has 12mm ID mounting holes, you may require bushes if using 8mm bolts. Also known as Guzzi ref. 37635705, 30635731. Always fit new brake pads when replacing a brake disc - BRA27611 or BRA11498

 This part is available by special order, request a quote

 30635701 GU30635701 30 63 57 01
 3063 5701 3063.5701 30.63.57.01

Brakelight switch for Magura handlebar master cylinder

This is a compatible replacement for the original part which is no longer available.

 This part is due back in stock soon, call 01484 841395 to reserve yours

39741101-z 39741101 GU39741101 39 74 11 01
 3974 1101 3974.1101 39.74.11.01

Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts

Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10279850 GU10279850 10 27 98 50
 1027 9850 1027.9850 10.27.98.50

One piece front brake disc disc

Always fit new brake pads when replacing a brake disc - BRA11498

 This part is available by special order, request a quote

 30613331 GU30613331 30 61 33 31
 3061 3331 3061.3331 30.61.33.31